add static files

sites/default/default.settings.php

@@ -0,0 +1,228 @@
+<?php
+// $Id: default.settings.php,v 1.8 2007/12/20 09:35:10 goba Exp $
+
+/**
+ * @file
+ * Drupal site-specific configuration file.
+ *
+ * IMPORTANT NOTE:
+ * This file may have been set to read-only by the Drupal installation
+ * program. If you make changes to this file, be sure to protect it again
+ * after making your modifications. Failure to remove write permissions
+ * to this file is a security risk.
+ *
+ * The configuration file to be loaded is based upon the rules below.
+ *
+ * The configuration directory will be discovered by stripping the
+ * website's hostname from left to right and pathname from right to
+ * left. The first configuration file found will be used and any
+ * others will be ignored. If no other configuration file is found
+ * then the default configuration file at 'sites/default' will be used.
+ *
+ * For example, for a fictitious site installed at
+ * http://www.drupal.org/mysite/test/, the 'settings.php'
+ * is searched in the following directories:
+ *
+ *  1. sites/www.drupal.org.mysite.test
+ *  2. sites/drupal.org.mysite.test
+ *  3. sites/org.mysite.test
+ *
+ *  4. sites/www.drupal.org.mysite
+ *  5. sites/drupal.org.mysite
+ *  6. sites/org.mysite
+ *
+ *  7. sites/www.drupal.org
+ *  8. sites/drupal.org
+ *  9. sites/org
+ *
+ * 10. sites/default
+ *
+ * If you are installing on a non-standard port number, prefix the
+ * hostname with that number. For example,
+ * http://www.drupal.org:8080/mysite/test/ could be loaded from
+ * sites/8080.www.drupal.org.mysite.test/.
+ */
+
+/**
+ * Database settings:
+ *
+ * Note that the $db_url variable gets parsed using PHP's built-in
+ * URL parser (i.e. using the "parse_url()" function) so make sure
+ * not to confuse the parser. If your username, password
+ * or database name contain characters used to delineate
+ * $db_url parts, you can escape them via URI hex encodings:
+ *
+ *   : = %3a   / = %2f   @ = %40
+ *   + = %2b   ( = %28   ) = %29
+ *   ? = %3f   = = %3d   & = %26
+ *
+ * To specify multiple connections to be used in your site (i.e. for
+ * complex custom modules) you can also specify an associative array
+ * of $db_url variables with the 'default' element used until otherwise
+ * requested.
+ *
+ * You can optionally set prefixes for some or all database table names
+ * by using the $db_prefix setting. If a prefix is specified, the table
+ * name will be prepended with its value. Be sure to use valid database
+ * characters only, usually alphanumeric and underscore. If no prefixes
+ * are desired, leave it as an empty string ''.
+ *
+ * To have all database names prefixed, set $db_prefix as a string:
+ *
+ *   $db_prefix = 'main_';
+ *
+ * To provide prefixes for specific tables, set $db_prefix as an array.
+ * The array's keys are the table names and the values are the prefixes.
+ * The 'default' element holds the prefix for any tables not specified
+ * elsewhere in the array. Example:
+ *
+ *   $db_prefix = array(
+ *     'default'   => 'main_',
+ *     'users'     => 'shared_',
+ *     'sessions'  => 'shared_',
+ *     'role'      => 'shared_',
+ *     'authmap'   => 'shared_',
+ *     'sequences' => 'shared_',
+ *   );
+ *
+ * Database URL format:
+ *   $db_url = 'mysql://username:password@localhost/databasename';
+ *   $db_url = 'mysqli://username:password@localhost/databasename';
+ *   $db_url = 'pgsql://username:password@localhost/databasename';
+ */
+$db_url = 'mysql://username:password@localhost/databasename';
+$db_prefix = '';
+
+/**
+ * Access control for update.php script
+ *
+ * If you are updating your Drupal installation using the update.php script
+ * being not logged in as administrator, you will need to modify the access
+ * check statement below. Change the FALSE to a TRUE to disable the access
+ * check. After finishing the upgrade, be sure to open this file again
+ * and change the TRUE back to a FALSE!
+ */
+$update_free_access = FALSE;
+
+/**
+ * Base URL (optional).
+ *
+ * If you are experiencing issues with different site domains,
+ * uncomment the Base URL statement below (remove the leading hash sign)
+ * and fill in the URL to your Drupal installation.
+ *
+ * You might also want to force users to use a given domain.
+ * See the .htaccess file for more information.
+ *
+ * Examples:
+ *   $base_url = 'http://www.example.com';
+ *   $base_url = 'http://www.example.com:8888';
+ *   $base_url = 'http://www.example.com/drupal';
+ *   $base_url = 'https://www.example.com:8888/drupal';
+ *
+ * It is not allowed to have a trailing slash; Drupal will add it
+ * for you.
+ */
+# $base_url = 'http://www.example.com';  // NO trailing slash!
+
+/**
+ * PHP settings:
+ *
+ * To see what PHP settings are possible, including whether they can
+ * be set at runtime (ie., when ini_set() occurs), read the PHP
+ * documentation at http://www.php.net/manual/en/ini.php#ini.list
+ * and take a look at the .htaccess file to see which non-runtime
+ * settings are used there. Settings defined here should not be
+ * duplicated there so as to avoid conflict issues.
+ */
+ini_set('arg_separator.output',     '&amp;');
+ini_set('magic_quotes_runtime',     0);
+ini_set('magic_quotes_sybase',      0);
+ini_set('session.cache_expire',     200000);
+ini_set('session.cache_limiter',    'none');
+ini_set('session.cookie_lifetime',  2000000);
+ini_set('session.gc_maxlifetime',   200000);
+ini_set('session.save_handler',     'user');
+ini_set('session.use_only_cookies', 1);
+ini_set('session.use_trans_sid',    0);
+ini_set('url_rewriter.tags',        '');
+
+/**
+ * Drupal automatically generates a unique session cookie name for each site
+ * based on on its full domain name. If you have multiple domains pointing at
+ * the same Drupal site, you can either redirect them all to a single domain
+ * (see comment in .htaccess), or uncomment the line below and specify their
+ * shared base domain. Doing so assures that users remain logged in as they
+ * cross between your various domains.
+ */
+# $cookie_domain = 'example.com';
+
+/**
+ * Variable overrides:
+ *
+ * To override specific entries in the 'variable' table for this site,
+ * set them here. You usually don't need to use this feature. This is
+ * useful in a configuration file for a vhost or directory, rather than
+ * the default settings.php. Any configuration setting from the 'variable'
+ * table can be given a new value. Note that any values you provide in
+ * these variable overrides will not be modifiable from the Drupal
+ * administration interface.
+ *
+ * Remove the leading hash signs to enable.
+ */
+# $conf = array(
+#   'site_name' => 'My Drupal site',
+#   'theme_default' => 'minnelli',
+#   'anonymous' => 'Visitor',
+/**
+ * A custom theme can be set for the off-line page. This applies when the site
+ * is explicitly set to off-line mode through the administration page or when
+ * the database is inactive due to an error. It can be set through the
+ * 'maintenance_theme' key. The template file should also be copied into the
+ * theme. It is located inside 'modules/system/maintenance-page.tpl.php'.
+ * Note: This setting does not apply to installation and update pages.
+ */
+#   'maintenance_theme' => 'minnelli',
+/**
+ * reverse_proxy accepts a boolean value.
+ *
+ * Enable this setting to determine the correct IP address of the remote
+ * client by examining information stored in the X-Forwarded-For headers.
+ * X-Forwarded-For headers are a standard mechanism for identifying client
+ * systems connecting through a reverse proxy server, such as Squid or
+ * Pound. Reverse proxy servers are often used to enhance the performance
+ * of heavily visited sites and may also provide other site caching,
+ * security or encryption benefits. If this Drupal installation operates
+ * behind a reverse proxy, this setting should be enabled so that correct
+ * IP address information is captured in Drupal's session management,
+ * logging, statistics and access management systems; if you are unsure
+ * about this setting, do not have a reverse proxy, or Drupal operates in
+ * a shared hosting environment, this setting should be set to disabled.
+ */
+#   'reverse_proxy' => TRUE,
+/**
+ * reverse_proxy accepts an array of IP addresses.
+ *
+ * Each element of this array is the IP address of any of your reverse
+ * proxies. Filling this array Drupal will trust the information stored
+ * in the X-Forwarded-For headers only if Remote IP address is one of
+ * these, that is the request reaches the web server from one of your
+ * reverse proxies. Otherwise, the client could directly connect to
+ * your web server spoofing the X-Forwarded-For headers.
+ */
+#   'reverse_proxy_addresses' => array('a.b.c.d', ...),
+# );
+
+/**
+ * String overrides:
+ *
+ * To override specific strings on your site with or without enabling locale
+ * module, add an entry to this list. This functionality allows you to change
+ * a small number of your site's default English language interface strings.
+ *
+ * Remove the leading hash signs to enable.
+ */
+# $conf['locale_custom_strings_en'] = array(
+#   'forum'      => 'Discussion board',
+#   '@count min' => '@count minutes',
+# );

sites/default/files/.htaccess

@@ -0,0 +1,5 @@
+SetHandler Drupal_Security_Do_Not_Remove_See_SA_2006_006
+Options None
+# For security reasons, Option followsymlinks cannot be overridden.
+#Options +FollowSymLinks
+Options +SymLinksIfOwnerMatch