repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=Притежателят е достигнал настроения лимит от %d брой хранилища.
form.name_reserved=Името на хранилището '%s' е запазено.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=Съдържанието на файла е б
editor.file_already_exists=Файл с име '%s' вече съществува в това хранилище.
editor.no_changes_to_show=Няма промени.
editor.fail_to_update_file=Невъзможно модифициране/създаване на файл '%s' заради грешка: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Добави поддиректория...
editor.unable_to_upload_files=Невъзможно качване на файлове в '%s' заради грешка: %v
editor.upload_files_to_dir=Качи файлове в '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Не може да се извърши обедин
pulls.cannot_auto_merge_helper=Моля, използвайте инструменти на командния ред за да разрешите конфликтите.
pulls.create_merge_commit=Create a merge commit
pulls.rebase_before_merging=Rebase before merging
pulls.commit_description=Commit Description
pulls.merge_pull_request=Обедини заявка за сливане
pulls.open_unmerged_pull_exists=`Невъзможно повторно отваряне, защото вече съществува заявка за сливане (#%d) от същото хранилище със същата информация за обединяване, която чака да бъде извършена`
pulls.delete_branch=Изтрий клон
@ -742,7 +746,7 @@ settings.tracker_issue_style=Стил на именуване на външна
settings.tracker_url_format_desc=Можете да използвате текстови маркери <code>{user} {repo} {index}</code> за потребителско име, име на хранилище и индекс на задача съответно.
settings.pulls_desc=Включва заявки за сливане за да може да се приемат външни доработки
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignore changes in whitespace
settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
settings.danger_zone=Опасна зона
@ -856,6 +860,8 @@ settings.add_key_success=Новият ключ за внедряване '%s' е
settings.deploy_key_deletion=Изтрий ключ за внедряване
settings.deploy_key_deletion_desc=При изтриването на този ключ за внедряване ще се премахнат свързаните права за достъп до това хранилище. Желаете ли да продължите?
settings.deploy_key_deletion_success=Ключът за внедряване е изтрит успешно!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Преглед на файлове
diff.parent=родител
@ -1096,6 +1102,7 @@ auths.new=Добави нов начин на удостоверяване
auths.name=Име
auths.type=Тип
auths.enabled=Активно
auths.default=Default
auths.updated=Последна модификация
auths.auth_type=Тип на удостоверяване
auths.auth_name=Име на удостоверяване
@ -1134,6 +1141,7 @@ auths.pam_service_name=Име на PAM услуга
pulls.merge_pull_request=Sloučit požadavek na natažení
pulls.open_unmerged_pull_exists=`Nemůžete znovuotevřít požadavek na natažení, neboť požadavek na natažení ze stejného repositáře se stejnými informacemi pro sloučení již existuje (#%d) a čeká na sloučení.`
pulls.delete_branch=Smazat větev
@ -742,7 +746,7 @@ settings.tracker_issue_style=Styl pojmenování úkolů v externím systému úk
settings.tracker_url_format_desc=Můžete použít zástupné výrazy <code>{user} {repo} {index}</code> pro uživatelské jméno, název repositáře a číslo úkolu.
settings.pulls_desc=Povolit požadavky na natažení, aby mohly být příspěvky veřejnosti akceptovány
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignorovat změny v netisknutelných znacích
settings.pulls.allow_rebase_merge=Povolit použití reabse pro slučovací commity
settings.danger_zone=Nebezpečná zóna
@ -856,6 +860,8 @@ settings.add_key_success=Nový klíč pro nasazení '%s' byl přidán!
settings.deploy_key_deletion=Smazat klíč pro nasazení
settings.deploy_key_deletion_desc=Smazání toho klíče pro nasazení smaže také veškerý k němu svázaný přístup do tohoto repositáře. Chcete pokračovat?
settings.deploy_key_deletion_success=Klíč pro nasazení byl smazán!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Procházet zdrojové kódy
diff.parent=rodič
@ -1096,6 +1102,7 @@ auths.new=Přidat nový zdroj
auths.name=Název
auths.type=Typ
auths.enabled=Povolený
auths.default=Default
auths.updated=Změněné
auths.auth_type=Typ ověření
auths.auth_name=Název ověření
@ -1134,6 +1141,7 @@ auths.pam_service_name=Název služby PAM
auths.enable_auto_register=Povolit zaregistrování se
auths.edit=Upravit nastavení ověřování
auths.activated=Tento způsob ověřování je aktivní
auths.default_auth=This authentication is default login source
auths.new_success=Nový způsob ověřování '%s' byl přidán.
auths.update_success=Nastavení ověřování bylo změněno.
pulls.open_unmerged_pull_exists=`Sie können diesen Pull-Request nicht wieder öffnen, da bereits ein offener Pull-Request (#%d) aus dem selben Repository mit den gleichen Merge-Informationen existiert und auf das Zusammenführen wartet.`
pulls.delete_branch=Zweig löschen
@ -742,7 +746,7 @@ settings.tracker_issue_style=Namenskonvention des externen Issue-Trackers:
settings.tracker_url_format_desc=Sie können die Platzhalter <code>{user} {repo} {index}</code> für den Benutzernamen, den Namen des Repositories und die Issue-Nummer verwenden.
settings.pulls_desc=Pull-Requests aktivieren, um öffentliche Mitwirkung zu ermöglichen
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.deploy_key_deletion_desc=Nach dem Löschen dieses Deploy-Schlüssels werden entsprechende Zugriffe auf dieses Repository nicht mehr möglich sein. Möchten Sie wirklich fortfahren?
settings.deploy_key_deletion_success=Deploy-Schlüssel wurde erfolgreich gelöscht!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Quellcode durchsuchen
diff.parent=Ursprung
@ -1096,6 +1102,7 @@ auths.new=Neue Quelle hinzufügen
pulls.cannot_auto_merge_helper=Please merge manually in order to resolve the conflicts.
pulls.create_merge_commit=Create a merge commit
pulls.rebase_before_merging=Rebase before merging
pulls.commit_description=Commit Description
pulls.merge_pull_request=Merge Pull Request
pulls.open_unmerged_pull_exists=`You can't perform reopen operation because there is already an open pull request (#%d) from same repository with same merge information and is waiting for merging.`
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=El propietario ha alcanzado el límite máximo de %d repositorios creados.
form.name_reserved=El nombre del repositorio '%s' está reservado.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=El contenido del archivo ha sido modificado de
editor.file_already_exists=Ya existe un archivo con nombre '%s' en este repositorio.
editor.no_changes_to_show=No existen cambios para mostrar.
editor.fail_to_update_file=Error al actualizar/crear el archivo '%s', error: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Añadir subdirectorio...
editor.unable_to_upload_files=Error al subir archivos a '%s', error: %v
editor.upload_files_to_dir=Subir archivos a '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Este Pull Request no puede ser fusionado automátic
pulls.cannot_auto_merge_helper=Por favor, fusiona manualmente para resolver los conflictos.
pulls.create_merge_commit=Create a merge commit
pulls.rebase_before_merging=Rebase before merging
pulls.commit_description=Commit Description
pulls.merge_pull_request=Fusionar Pull Request
pulls.open_unmerged_pull_exists=`Usted no puede realizar la operación de reapertura porque en estos momentos existe una solicitud de pull request (#%d) para el mismo repositorio con la misma información que se encuentra a la espera de aprobación`
pulls.delete_branch=Eliminar la rama
@ -742,7 +746,7 @@ settings.tracker_issue_style=Estilo de etiquetado del tracker externo de inciden
settings.tracker_url_format_desc=Puedes usar las plantillas <code>{user} {repo} {index}</code> para el nombre de usuario, nombre del repositorio e índice de la incidencia.
settings.pulls_desc=Habilitar Pull Requests para aceptar contribuciones públicas
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignore changes in whitespace
settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
settings.danger_zone=Zona de Peligro
@ -856,6 +860,8 @@ settings.add_key_success=¡La nueva clave de desplieque '%s' ha sido creada con
settings.deploy_key_deletion=Eliminar Clave de Despliegue
settings.deploy_key_deletion_desc=Al eliminar esta clave de despliegue se perderán el permiso de acceso a este repositorio con dicha clave. ¿Deseas continuar?
settings.deploy_key_deletion_success=¡Clave de despliegue eliminada con éxito!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Explorar el Código
diff.parent=padre
@ -1096,6 +1102,7 @@ auths.new=Añadir nuevo origen
auths.name=Nombre
auths.type=Tipo
auths.enabled=Activo
auths.default=Default
auths.updated=Actualizado
auths.auth_type=Tipo de autenticación
auths.auth_name=Nombre de autenticación
@ -1134,6 +1141,7 @@ auths.pam_service_name=Nombre del Servicio PAM
@ -423,6 +423,8 @@ mirror_last_synced=آخرین همگام سازی
watchers=دنبالکنندگان
stargazers=ستاره شناسان
forks=انشعاب ها
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=مخزن های دارنده حساب به حداکثر تعداد مجاز %d رسیده است.
form.name_reserved=یک مخزن با نام '%s' از قبل وجود دارد.
@ -520,6 +522,7 @@ editor.file_changed_while_editing=محتوای فایل از زمانی که ش
editor.file_already_exists=فایلی با نام %s از قبل در مخزن موجود است.
editor.no_changes_to_show=تغییری برای نمایش وجود ندارد.
editor.fail_to_update_file=خطا در ساخت/به روزرسانی فایل %. خطای رخ داده : %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=افزودن زیرپوشه...
editor.unable_to_upload_files=عدم موفقیت در آپلود فایل به '%s' با خطا: %v
editor.upload_files_to_dir=آپلود فایل به '%s'
@ -640,6 +643,7 @@ pulls.cannot_auto_merge_desc=این pull request به علت تداخل نمی
pulls.cannot_auto_merge_helper=لطفا عملیات ادغام را به صورت دستی انجام دهید تا این تداخل برطرف شود.
pulls.create_merge_commit=ایجاد یک کامیت برای ادغام سازی
pulls.rebase_before_merging=Rebase قبل از ادغام
pulls.commit_description=Commit Description
pulls.merge_pull_request=ایجاد درخواست ادغام
pulls.open_unmerged_pull_exists=`به علت باز بودن pull request (#%d) از مخزنی مشابه و به همراه اطلاعات ادغام مشابه که در انتظار ادغام می باشد، بازگشایی مجدد مقدور نیست`
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Tätä pull-pyyntöä ei voi yhdistää automaattis
pulls.cannot_auto_merge_helper=Ole hyvä ja yhdistä manuaalisesti konfliktien ratkaisemiseksi.
pulls.create_merge_commit=Create a merge commit
pulls.rebase_before_merging=Rebase before merging
pulls.commit_description=Commit Description
pulls.merge_pull_request=Yhdistä Pull-pyyntö
pulls.open_unmerged_pull_exists=`Et voi suorittaa uudelleenavaus toimintoa koska on jo olemassa pull-pyyntö (#%d) samasta reposta samoilla yhdistämistiedoilla ja odottaa yhdistämistä.`
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=Le propriétaire a atteint le nombre maximal de %d dépôts créés.
form.name_reserved=Le nom de dépôt '%s' est réservé.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=Le contenu du fichier à changé depuis que vo
editor.file_already_exists=La branche '%s' existe déjà dans ce dépôt.
editor.no_changes_to_show=Il n’y a aucun changement à afficher.
editor.fail_to_update_file=Échec lors de la mise à jour/création du fichier '%s' avec l'erreur: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Ajouter un sous-répertoire...
editor.unable_to_upload_files=Échec lors de l'envoie du fichier '%s' avec l'erreur: %v
editor.upload_files_to_dir=Transférer les fichiers vers '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Cette pull request ne peut être fusionnée automat
pulls.cannot_auto_merge_helper=Fusionner manuellement afin de résoudre les conflits.
pulls.create_merge_commit=Créer un commit de fusion
pulls.rebase_before_merging=Rebaser avant la fusion
pulls.commit_description=Commit Description
pulls.merge_pull_request=Fusionner la Pull Request
pulls.open_unmerged_pull_exists=`Vous ne pouvez effectuer une réouverture car il y a déjà une pull-request ouverte (#%d) depuis le même dépôt avec les mêmes informations de fusion et est en attente de fusion.`
pulls.delete_branch=Supprimer la branche
@ -742,7 +746,7 @@ settings.tracker_issue_style=Style de nommage des bugs du tracker externe :
settings.tracker_url_format_desc=Vous pouvez utiliser l'espace réservé <code>{user} {repo} {index}</code> pour le nom d'utilisateur, le nom du dépôt et le numéro de bug.
settings.pulls_desc=Activer les pull requests pour accepter les contributions publiques
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignorer les changements quand ce sont des espaces
settings.pulls.allow_rebase_merge=Autoriser l'utilisation de rebase pour fusionner les validations
settings.danger_zone=Zone de danger
@ -856,6 +860,8 @@ settings.add_key_success=La nouvelle clé de déploiement '%s' a été ajoutée
settings.deploy_key_deletion=Supprimer la Clé de Déploiement
settings.deploy_key_deletion_desc=Supprimer cette clé de déploiement effacera tous les accès relatifs pour ce référentiel. Voulez-vous continuer ?
settings.deploy_key_deletion_success=La clé de déploiement a été supprimée avec succès !
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Parcourir la source
diff.parent=Parent
@ -1096,6 +1102,7 @@ auths.new=Ajouter une nouvelle source d'authentification
auths.name=Nom
auths.type=Type
auths.enabled=Activé
auths.default=Default
auths.updated=Mis à jour
auths.auth_type=Type d'authentification
auths.auth_name=Nom de l'authentification
@ -1134,6 +1141,7 @@ auths.pam_service_name=Nom du Service PAM
auths.enable_auto_register=Connexion Automatique
auths.edit=Modifier les paramètres d'authentification
auths.activated=Authentification activée
auths.default_auth=This authentication is default login source
auths.new_success=Nouvelle authentification «%s » a été ajoutée avec succès.
auths.update_success=Les paramètre d'authentification a été mis à jour avec succès.
auths.update=Mettre à jour les paramètres d'authentifications
@ -421,6 +421,8 @@ mirror_last_synced=Sincronizado por última vez
watchers=Seguidores
stargazers=Fans
forks=Forks
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=El propietario ha alcanzado el límite máximo de %d repositorios creados.=O propietario acadou o límite máximo de %d repositorios creados.
form.name_reserved=El nombre del repositorio '%s' está reservado.=O nome do repositorio '%s' está reservado.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=O contido do arquivo cambiou desde que comezac
editor.file_already_exists=Un arquivo co nome '%s' xa existe no repositorio.
editor.no_changes_to_show=Non hai cambios que mostrar.
editor.fail_to_update_file=Fallou o actualizar/crear o arquivo '%s' co erro: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Engadir subdirectorio...
editor.unable_to_upload_files=Fallou ao subir arquivos a '%s' co erro: %v
editor.upload_files_to_dir=Subir arquivos a '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Este Pull Request non pode ser fusionado automatica
pulls.cannot_auto_merge_helper=Por favor, fusiona manualmente para resolver os conflitos.
pulls.create_merge_commit=Create a merge commit
pulls.rebase_before_merging=Rebase before merging
pulls.commit_description=Commit Description
pulls.merge_pull_request=Fusionar Pull Request
pulls.open_unmerged_pull_exists=`Vostede non pode realizar a operación de reapertura porque nestes momentos existe unha solicitude de pull request (#%d) para o mesmo repositorio coa mesma información que se encontra á espera de aprobación`
pulls.delete_branch=Eliminar branch
@ -742,7 +746,7 @@ settings.tracker_issue_style=Estilo de etiquetaxe do tracker externo de incidenc
settings.tracker_url_format_desc=Podes usar os modelos <code>{user} {repo} {index}</code> para o nome de usuario, nome do repositorio e índice da incidencia.
settings.pulls_desc=Habilitar Pull Requests para aceptar contribucións públicas
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignore changes in whitespace
settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
settings.danger_zone=Zona de perigo
@ -856,6 +860,8 @@ settings.add_key_success=A nova clave de despregamento '%s' foi creada con éxit
settings.deploy_key_deletion=Eliminar clave de despregamento
settings.deploy_key_deletion_desc=Ao eliminar esta clave de despregamento perderase o permiso de acceso a este repositorio coa dita clave. Desexas continuar?
settings.deploy_key_deletion_success=Clave de despregamento eliminada con éxito!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Explorar o código
diff.parent=pai
@ -1096,6 +1102,7 @@ auths.new=Engadir nova orixe
auths.name=Nome
auths.type=Tipo
auths.enabled=Activo
auths.default=Default
auths.updated=Actualizado
auths.auth_type=Tipo de autenticación
auths.auth_name=Nome de autenticación
@ -1134,6 +1141,7 @@ auths.pam_service_name=Nome do servizo PAM
pulls.open_unmerged_pull_exists=`Nem tudja újranyitni, mert már van egy nyitott egyesítési kérés (#%d) ugyanebben a tárolóban, ugyanezekket az egyesítési információkkal, és végrehajtásra vár.`
settings.tracker_url_format_desc=Az alábbiak helyettesítik a felhasználónevet, repository nevet és hibajegy számot: <code>{user} {repo} {index}</code>.
settings.pulls_desc=Beolvasztási kérések engedélyezése a nyilvános hozzájárulások végett
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Whitespacek figyelmen kívül hagyása
pulls.open_unmerged_pull_exists='Anda tidak dapat melakukan operasi membuka kembali karena sudah ada permintaan tarik terbuka (#%d) dari repositori yang sama dengan penggabungan informasi yang sama dan menunggu penggabungan. '
settings.tracker_url_format_desc=Anda dapat menggunakan placeholder <code>{user}{repo}{index</code> untuk nama pengguna, nama repositori dan indeks masalah.
settings.pulls_desc=Aktifkan permintaan tarik untuk menerima kontribusi publik
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Abaikan perubahan di spasi
settings.pulls.allow_rebase_merge=Izinkan gunakan rebase untuk menggabungkan komit
settings.danger_zone=Zona Bahaya
@ -856,6 +860,8 @@ settings.add_key_success=Kunci penerapan baru '%s' telah berhasil ditambahkan!
settings.deploy_key_deletion=Hapus Kunci Deploy
settings.deploy_key_deletion_desc=Menghapus kunci penggelaran ini akan menghapus semua akses yang terkait untuk repositori ini. Apakah Anda ingin melanjutkan?
settings.deploy_key_deletion_success=Kunci penempatan telah berhasil dihapus!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Jelajahi Sumber
diff.parent=induk
@ -1096,6 +1102,7 @@ auths.new=Tambahkan Sumber Baru
auths.name=Nama
auths.type=Mengetik
auths.enabled=Diaktifkan
auths.default=Default
auths.updated=Diperbarui
auths.auth_type=Jenis Autentikasi
auths.auth_name=Nama Otentikasi
@ -1134,6 +1141,7 @@ auths.pam_service_name=Nama layanan PAM
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=Il proprietario ha raggiunto il limite massimo di %d repository creati.
form.name_reserved=Il nome repository %s è riservato.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=Il file è stato cambiato in un'altra posizion
editor.file_already_exists=Un file di nome '%s' esiste già in questo repository.
editor.no_changes_to_show=Nessuna modifica da mostrare.
editor.fail_to_update_file=La creazione o la modifica del file '%s' è fallita: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Aggiungi sottocartella...
editor.unable_to_upload_files=È fallito il caricamento dei file su '%s': %v
editor.upload_files_to_dir=Carica file su '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Questa pull request non può essere mergiata automa
pulls.cannot_auto_merge_helper=Effettua il merge manualmente per risolvere i conflitti.
pulls.create_merge_commit=Create a merge commit
pulls.rebase_before_merging=Effettua un Rebase prima del Merge
pulls.commit_description=Commit Description
pulls.merge_pull_request=Unisci Pull Request
pulls.open_unmerged_pull_exists=`You can't perform reopen operation because there is already an open pull request (#%d) from same repository with same merge information and is waiting for merging.`
pulls.open_unmerged_pull_exists=`Jūs nevarat veikt atkārtotas atvēršanas darbību, jo jau eksistē izmaiņu pieprasījums (#%d) no šī repozitorija ar tādu pašu sapludināšanas informāciju un gaida sapludināšanu.`
pulls.delete_branch=Dzēst atzaru
@ -742,7 +746,7 @@ settings.tracker_issue_style=Ārējā problēmu reģistra nosaukumu stils:
settings.tracker_issue_style.numeric=Cipari
settings.tracker_issue_style.alphanumeric=Burti un cipari
settings.tracker_url_format_desc=Jūs varat izmantot <code>{user}{repo}{index}</code> lietotājvārdam, repozitorija nosaukumam un problēmas identifikātoram.
settings.pulls_desc=Iespējot izmaiņu pieprasījumus lai saņemtu publiskus ieguldījumus
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignore changes in whitespace
settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
settings.danger_zone=Bīstamā zona
@ -856,6 +860,8 @@ settings.add_key_success=Izvietošanas atslēga '%s' tik veiksmīgi pievienota!
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=De eigenaar heeft maximale creatie limiet van %d repositories bereikt.
form.name_reserved=Repositorienaam '%s' is gereserveerd.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=File content has been changed since you starte
editor.file_already_exists=A file with name '%s' already exists in this repository.
editor.no_changes_to_show=Er zijn geen wijzigingen om weer te geven.
editor.fail_to_update_file=Failed to update/create file '%s' with error: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Submap toevoegen...
editor.unable_to_upload_files=Failed to upload files to '%s' with error: %v
editor.upload_files_to_dir=Bestanden uploaden naar '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Dit pull-request kan niet worden gemerged omdat er
pulls.cannot_auto_merge_helper=Gelieve beide versies manueel samen te voegen om de conflicten op te lossen.
pulls.create_merge_commit=Create a merge commit
pulls.rebase_before_merging=Rebase before merging
pulls.commit_description=Commit Description
pulls.merge_pull_request=Samenvoegen van pull verzoek
pulls.open_unmerged_pull_exists=U kan de bewerking 'heropenen' niet uitvoeren omdat er al een pull-aanvraag (#%d) is van dezelfde repository met dezelfde informatie. Voeg deze eerst samen.
settings.tracker_url_format_desc=U kan de aanduidingen <code>{user} {repo} {index}</code> gebruiken voor de gebruikersnaam, de naam van de repository en de lijst van open tickets.
settings.pulls_desc=Schakel 'pull request' in om publieke bijdragen te mogelijk te maken
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignore changes in whitespace
settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
settings.deploy_key_deletion_desc=Het verwijderen van deze deploy sleutel zal alle gerelateerde toegang verwijderen voor deze repositorie. Wilt u doorgaan?
settings.deploy_key_deletion_success=Deploy sleutel werd met succes verwijderd!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Bladeren bron
diff.parent=bovenliggende
@ -1096,6 +1102,7 @@ auths.new=Nieuwe bron toevoegen
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=Właściciel osiągnął limit maksymalnej ilości repozytoriów %d.
form.name_reserved=Nazwa repozytorium „%s” jest zarezerwowana.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=Zawartość pliku została zmieniona od rozpoc
editor.file_already_exists=Nazwa pliku '%s' już istnieje w tym repozytorium.
editor.no_changes_to_show=Brak zmian do pokazania.
editor.fail_to_update_file=Tworzenie/aktualizacja pliku '%s' nie powiodła się z błędem: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Dodaj podkatalog...
editor.unable_to_upload_files=Wysyłanie plików do '%s' nie powiodło się z błędem: %v
editor.upload_files_to_dir=Prześlij pliki do '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Pull request nie może być automatycznie scalony z
pulls.cannot_auto_merge_helper=Proszę scalić ręcznie, aby rozwiązać konflikty.
pulls.create_merge_commit=Utwórz scalający commit
pulls.rebase_before_merging=Rebase przed scaleniem
pulls.commit_description=Commit Description
pulls.merge_pull_request=Scal Pull Request
pulls.open_unmerged_pull_exists=`Nie można otworzyć ponownie ponieważ już istnieje gotowy do scalenia pull request (#%d) z tego samego repozytorium z tymi samymi informacjami.`
pulls.delete_branch=Usuń gałąź
@ -742,7 +746,7 @@ settings.tracker_issue_style=Styl nazw zewnętrznego systemu zgłaszania problem
settings.tracker_url_format_desc=Symbole zastępcze <code>{user} {repo} {index}</code> mogą być użyte dla nazwy użytkownika, nazwy repozytorium i numeru problemu.
settings.pulls_desc=Włącz obsługę pull request, aby akceptować publiczny wkład
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignoruj zmiany w białych znakach
settings.pulls.allow_rebase_merge=Zezwalaj na użycie rebase do scalenia commitów
settings.deploy_key_deletion_desc=Usunięcie tego klucza wdrożenia spowoduje usunięcie powiązanego dostępu do tego repozytorium. Czy chcesz kontynuować?
settings.deploy_key_deletion_success=Klucz wdrożenia został pomyślnie usunięty!
settings.description_desc=Description of repository. Maximum 512 characters length.
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=O proprietário atingiu o limite máximo de criação de repositórios de %d.
form.name_reserved=O nome de repositório '%s' não pode ser usado.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=O conteúdo do arquivo mudou desde que você c
editor.file_already_exists=Um arquivo com nome '%s' já existe neste repositório.
editor.no_changes_to_show=Nenhuma alteração a mostrar.
editor.fail_to_update_file=Houve erro ao criar ou atualizar arquivo '%s': %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Adicionar o subdiretório...
editor.unable_to_upload_files=Houve erro ao fazer upload de arquivos para '%s': %v
editor.upload_files_to_dir=Enviar arquivos para '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=O merge deste Pull Request não pode ser aplicado a
pulls.cannot_auto_merge_helper=Por favor, aplique o merge manualmente para resolver os conflitos.
pulls.create_merge_commit=Criar commit de um merge
pulls.rebase_before_merging=Rebase before merging
pulls.commit_description=Commit Description
pulls.merge_pull_request=Solicitação de merge de Pull Request
pulls.open_unmerged_pull_exists=`Você não pode executar a operação de reabrir porque já existe um Pull request aberto (#%d) do mesmo repositório com as mesmas informações de merge e está esperando pelo merge.`
pulls.delete_branch=Excluir Branch
@ -742,7 +746,7 @@ settings.tracker_issue_style=Estilo de nome de issue tracker externo:
settings.tracker_url_format_desc=Você pode usar o espaço reservado <code>{user} {repo} {index}</code> para o nome do usuário, índice de nome e a questão do repositório.
settings.pulls_desc=Habilitar Pull Requests para aceitar contribuições públicas
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignorar alterações em espaço em branco
settings.pulls.allow_rebase_merge=Permitir rebase para commits via merge
settings.danger_zone=Zona de perigo
@ -856,6 +860,8 @@ settings.add_key_success=A nova chave de Deploy '%s' foi adicionada com sucesso!
settings.deploy_key_deletion=Exclusão de chave de Deploy
settings.deploy_key_deletion_desc=Excluir esta chave de Deploy removerá permissões de acesso a este repositório. Quer mesmo continuar?
settings.deploy_key_deletion_success=Chave de Deploy excluída com sucesso!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Ver código fonte
diff.parent=pai
@ -1096,6 +1102,7 @@ auths.new=Adicionar nova fonte
auths.name=Nome
auths.type=Tipo
auths.enabled=Habilitado
auths.default=Default
auths.updated=Atualizado
auths.auth_type=Tipo de autenticação
auths.auth_name=Nome da autenticação
@ -1134,6 +1141,7 @@ auths.pam_service_name=Nome de Serviço PAM
auths.enable_auto_register=Habilitar Registro Automático
auths.edit=Editar a configuração de autenticação
auths.activated=Esta autenticação foi ativada
auths.default_auth=This authentication is default login source
auths.new_success=Nova autenticação '%s' foi adicionada com sucesso.
auths.update_success=A configuração da autenticação foi atualizada com sucesso.
auths.update=Atualizar a configuração da autenticação
editor.file_already_exists=Файл с именем «%s» уже существует в этом репозитории.
editor.no_changes_to_show=Нет изменений.
editor.fail_to_update_file=Не удалось обновить/создать файл «%s» из-за ошибки: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Добавьте подкаталог...
editor.unable_to_upload_files=Не удалось загрузить файлы в «%s» из-за ошибки: %v
editor.upload_files_to_dir=Загрузить файлы '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Этот запрос на слияние не мо
pulls.cannot_auto_merge_helper=Пожалуйста, совершите слияние вручную для урегулирования конфликтов.
pulls.create_merge_commit=Создать коммит на слияние
pulls.rebase_before_merging=Выполнить rebase перед слиянием
pulls.commit_description=Commit Description
pulls.merge_pull_request=Слить пулл-реквест
pulls.open_unmerged_pull_exists=`Вы не можете снова открыть, поскольку уже существует запрос на слияние (#%d) из того же репозитория с той же информацией о слиянии и ожидающий слияния. `
pulls.delete_branch=Удалить ветку
@ -742,7 +746,7 @@ settings.tracker_issue_style=Стиль Именования Внешней Си
pulls.open_unmerged_pull_exists=`Nemôžete znovu otvoriť požiadavku na stiahnutie, pretože požiadavka na stiahnutie z rovnakého repozitára s rovnakými informáciami pre zlúčenie už existuje (#%d) a čaká na zlúčenie.`
pulls.delete_branch=Odstrániť vetvu
@ -742,7 +746,7 @@ settings.tracker_issue_style=Štýl pomenovania úloh v externom systéme úloh:
settings.tracker_url_format_desc=Môžete použiť zástupné výrazy <code>{user} {repo} {index}</code> pre užívateľské meno, názov repozitára a číslo úlohy.
settings.pulls_desc=Povoliť požiadavky na stiahnutie, aby mohli byť príspevky verejnosti akceptované
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignorovať zmeny v prázdnom priestore
settings.pulls.allow_rebase_merge=Povoliť použitie rebase pre zlúčenie revízií
settings.danger_zone=Riziková zóna
@ -856,6 +860,8 @@ settings.add_key_success=Nový deploy kľúč '%s' bol úspešne pridaný!
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=Власник има максимум број %d спремишта.
form.name_reserved=Име спремишта '%s' је резервирано.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=Садржај датотеке је пром
editor.file_already_exists=Датотека са именом '%s' већ постоји у овом спремишту.
editor.no_changes_to_show=Нема никаквих промена.
editor.fail_to_update_file=Промена над '%s' није успело са грешком: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Додај поддиректоријуми...
editor.unable_to_upload_files=Учитање датотеке '%s' није успело са грешкном: %v
editor.upload_files_to_dir=Пошаљи датотеке на '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Овај захтев за спајање не мо
pulls.cannot_auto_merge_helper=Молимо вас, обавите спајање ручно да би сте разрешили сукобе.
pulls.create_merge_commit=Направите спајање
pulls.rebase_before_merging=Поврат пре обједињавања
pulls.commit_description=Commit Description
pulls.merge_pull_request=Обави спајање
pulls.open_unmerged_pull_exists=`Неможете поново отворити јер већ постоји захтев за спајање (#%d) из истог спремишта са истим информацијама о спајању и чека спајање.`
pulls.delete_branch=Избришите грану
@ -742,7 +746,7 @@ settings.tracker_issue_style=Стил именовања на спољном с
pulls.open_unmerged_pull_exists=`Du kan inte utföra återöppningsoperationen eftersom det finns redan en öppen pull-förfrågan (#%d) från samma repo med samma sammanfogningsinformation som väntar på sammanfogning.`
pulls.delete_branch=Ta bort gren
@ -742,7 +746,7 @@ settings.tracker_issue_style=Namngivningsstil hos det externa ärendehanteringsy
settings.tracker_url_format_desc=Du kan använda platshållaren <code>{user} {repo} {index}</code> för användarnamn, reponamn, och ärendenummer.
settings.pulls_desc=Aktivera pullförfrågningar för att ta emot publika bidrag
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ignore changes in whitespace
settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
settings.danger_zone=Högrisksområde
@ -856,6 +860,8 @@ settings.add_key_success=Den nya driftsättningsnyckeln '%s' har lagts till!
settings.deploy_key_deletion=Ta bort distribueringsnyckel
settings.deploy_key_deletion_desc=Borttagning av detta distributionsnyckel kommer att ta bort all relaterad åtkomst till det här repot. Vill du fortsätta?
settings.deploy_key_deletion_success=Distributionsnyckeln har tagits bort!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Bläddra i källkod
diff.parent=förälder
@ -1096,6 +1102,7 @@ auths.new=Lägg till ny källa
auths.name=Namn
auths.type=Typ
auths.enabled=Aktiv
auths.default=Default
auths.updated=Uppdaterad
auths.auth_type=Autentiseringstyp
auths.auth_name=Autentiseringsnamn
@ -1134,6 +1141,7 @@ auths.pam_service_name=PAM Service Name
auths.enable_auto_register=Enable Auto Registration
auths.edit=Edit Authentication Setting
auths.activated=This authentication is activated
auths.default_auth=This authentication is default login source
auths.new_success=New authentication '%s' has been added successfully.
auths.update_success=Authentication setting has been updated successfully.
pulls.open_unmerged_pull_exists=`Yeniden açma işlemini gerçekleştiremezsiniz. Çünkü zaten aynı depodan, aynı birleştirme bilgisiyle açık olan bir değişiklik isteği var (#%d) ve birleştirme bekliyor.`
pulls.delete_branch=Şubeyi Sil
@ -742,7 +746,7 @@ settings.tracker_issue_style=Harici Hata İzleyicisi Adlandırma Stili:
@ -518,6 +520,7 @@ editor.file_changed_while_editing=Вміст файлу було змінено
editor.file_already_exists=Файл на ім'я '%s' вже присутній у репозиторії.
editor.no_changes_to_show=Нема змін для показу.
editor.fail_to_update_file=Не вдалося оновити/створити файл '%s' через помилку: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Додати підкаталогу...
editor.unable_to_upload_files=Не вдалося завантажити файли до '%s' через помилку: %v
editor.upload_files_to_dir=Завантажувати файли до '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Цей запрос не може бути влит
pulls.cannot_auto_merge_helper=Будь ласка влийте вручну щоб врегулювати конфлікти.
pulls.create_merge_commit=Створити коміт на злиття
pulls.rebase_before_merging=Перебазувати перед об'єднанням
pulls.commit_description=Commit Description
pulls.merge_pull_request=Влити запрос на злиття
pulls.open_unmerged_pull_exists=`Ви не можете перевідкрити, бо вже існує запрос на злиття (#%d) з того самого репозиторію, з тією самою інформацією про злиття, та він очікує на влиття.`
pulls.delete_branch=Видалити гілку
@ -742,7 +746,7 @@ settings.tracker_issue_style=Стиль найменування задач в
settings.tracker_url_format_desc=Ви можете використовувати заповнювач <code>{user} {repo} {index}</code> для ім'я користувача, назви репозиторію на номеру проблеми.
settings.pulls_desc=Увімкнути публічні запроси на злиття
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Ігнорувати зміни у пробільних символах
settings.pulls.allow_rebase_merge=Дозволити перебазування для merge-комітів
settings.danger_zone=Небезпечна зона
@ -856,6 +860,8 @@ settings.add_key_success=Новий ключ розгортування '%s' у
settings.deploy_key_deletion=Видалити ключ для розгортування
settings.deploy_key_deletion_desc=Видалення цього ключа для розгортування призведе о видалення усіх пов'язаних прав до цього репозиторію. Ви справді бажаєте продовжити?
settings.deploy_key_deletion_success=Ключі для розгортування було успішно видалено!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Переглянути джерело
diff.parent=батько
@ -1096,6 +1102,7 @@ auths.new=Додати нове джерело
auths.name=Назва
auths.type=Тип
auths.enabled=Увімкнено
auths.default=Default
auths.updated=Оновлено
auths.auth_type=Тип автентифікації
auths.auth_name=Назва автентифікації
@ -1134,6 +1141,7 @@ auths.pam_service_name=Ім'я служби PAM
@ -421,6 +421,8 @@ mirror_last_synced=Lần đồng bộ cuối
watchers=Người theo dõi
stargazers=Stargazers
forks=Forks
repo_description_helper=Description of repository. Maximum 512 characters length.
repo_description_length=Available characters
form.reach_limit_of_creation=Chủ sở hữu đã đạt giới hạn tối đa %d kho.
form.name_reserved=Tên kho '%s' đã được dành riêng.
@ -518,6 +520,7 @@ editor.file_changed_while_editing=File content has been changed since you starte
editor.file_already_exists=Tên tập tin '%s' đã tồn tại trong kho này.
editor.no_changes_to_show=Không có thay đổi nào.
editor.fail_to_update_file=Failed to update/create file '%s' with error: %v
editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
editor.add_subdir=Thêm thư mục con...
editor.unable_to_upload_files=Failed to upload files to '%s' with error: %v
editor.upload_files_to_dir=Tải tập tin đến '%s'
@ -638,6 +641,7 @@ pulls.cannot_auto_merge_desc=Yêu cầu kéo này không thể được kết h
pulls.cannot_auto_merge_helper=Xin vui lòng nhập theo cách thủ công để giải quyết các cuộc xung đột.
pulls.create_merge_commit=Tạo một merge commit
pulls.rebase_before_merging=Rebase trước khi sáp nhập
pulls.commit_description=Commit Description
pulls.merge_pull_request=Merge Pull Request
pulls.open_unmerged_pull_exists=' Bạn không thể thực hiện thao tác reopen vì đã có một yêu cầu kéo đang mở (#%d) từ kho lưu trữ cùng với cùng một kết hợp thông tin và chờ đợi cho việc sáp nhập.'
pulls.delete_branch=Xóa nhánh
@ -742,7 +746,7 @@ settings.tracker_issue_style=Kiểu Url theo dõi các vấn đề bên ngoài:
settings.tracker_issue_style.numeric=Kiểu số
settings.tracker_issue_style.alphanumeric=Chữ số
settings.tracker_url_format_desc=You can use placeholder <code>{user} {repo} {index}</code> for user name, repository name and issue index.
settings.pulls_desc=Cho phép yêu cầu pull để chấp nhận sự đóng góp công cộng
settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
settings.pulls.ignore_whitespace=Bỏ qua sự thay đổi của khoảng trắng
settings.pulls.allow_rebase_merge=Cho phép sử dụng rebase để merge các commit
settings.danger_zone=Vùng nguy hiểm
@ -856,6 +860,8 @@ settings.add_key_success=Bộ nhớ heap đã được phát hành!
settings.deploy_key_deletion=Xóa Khóa triển khai
settings.deploy_key_deletion_desc=Xóa bỏ điều này triển khai các phím sẽ loại bỏ tất cả liên quan đến truy cập cho các kho lưu trữ này. Bạn có muốn tiếp tục?
settings.deploy_key_deletion_success=Deploy key has been deleted successfully!
settings.description_desc=Description of repository. Maximum 512 characters length.
settings.description_length=Available characters
diff.browse_source=Browse Source
diff.parent=mục cha
@ -1096,6 +1102,7 @@ auths.new=Thêm mới source
auths.name=Tên
auths.type=Loại
auths.enabled=Đã kích hoạt
auths.default=Default
auths.updated=Đã cập nhật
auths.auth_type=Loại xác thực
auths.auth_name=Tên đăng nhập xác thực
@ -1134,6 +1141,7 @@ auths.pam_service_name=Tên dịch vụ PAM
auths.enable_auto_register=Cho phép tự động đăng ký
auths.edit=Chỉnh sửa cài đặt xác thực
auths.activated=Xác thực này đã được kích hoạt
auths.default_auth=This authentication is default login source
auths.new_success=Xác thực mới '%s' đã được thêm vào thành công.
auths.update_success=Cài đặt xác thực đã được cập nhật thành công.
Unknwon
6 years ago