locale: sync from Crowdin

conf/locale/locale_bg-BG.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Вече имате профил? Впишете се сег
 social_register_hepler_msg=Вече имате профил? Свържете се сега!
 disable_register_prompt=За съжаление създаването на нови регистрации е изключено. Обърнете се към администратора на сайта.
 disable_register_mail=За съжаление потвърждението на регистрации е изключено.
+auth_source=Authentication Source
+local=Local
 remember_me=Запомни ме
 forgot_password=Забравена парола
 forget_password=Забравена парола?
@@ -229,6 +231,7 @@ org_name_been_taken=Името на организацията вече се п
 team_name_been_taken=Името на екипа вече се ползва.
 email_been_used=Този адрес на ел. поща вече се ползва.
 username_password_incorrect=Потребителското име или паролата не са верни.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Моля уверете се, че въведеното име на хранилище е вярно.
 enterred_invalid_owner_name=Моля уверете се, че въведеното име на притежател е вярно.
 enterred_invalid_password=Моля уверете се, че въведената парола е вярна.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=След това въведете паролата:
 two_factor_verify=Потвърждаване
 two_factor_invalid_passcode=Въведената парола е невалидна! Моля опитайте отново.
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=Предаване
 settings.event_push_desc=Git предаване към хранилището
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Заявка за сливане
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Активна
@@ -1087,7 +1091,7 @@ repos.stars=Харесвания
 repos.issues=Задачи
 repos.size=Размер
 
-auths.auth_manage_panel=Управление на удостоверявания
+auths.auth_sources=Authentication Sources
 auths.new=Добави нов начин на удостоверяване
 auths.name=Име
 auths.type=Тип
@@ -1128,7 +1132,6 @@ auths.enable_tls=Включи TLS криптиране
 auths.skip_tls_verify=Пропусни проверка на TLS сертификат
 auths.pam_service_name=Име на PAM услуга
 auths.enable_auto_register=Включи автоматична регистрация
-auths.tips=Съвети
 auths.edit=Редактирай настройки за удостоверяване
 auths.activated=Това удостоверяване е активно
 auths.new_success=Новото удостоверяване '%s' е добавено успешно.
@@ -1284,7 +1287,6 @@ notices.delete_success=Системните съобщения са изтрит
 
 [action]
 create_repo=създаде хранилище <a href="%s"> %s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=преименува хранилище от <code>%[1]s</code> на <a href="%[2]s">%[3]s</a>
 commit_repo=предаде към <a href="%[1]s/src/%[2]s">%[3]s</a> в <a href="%[1]s">%[4]s</a>
 compare_commits=Сравнение между тези %d ревизии
@@ -1301,6 +1303,10 @@ create_branch=създаде клон <a href="%[1]s/src/%[2]s"> %[3]s</a> % <a
 delete_branch=изтри клон <code>%[2]s</code> % <a href="%[1]s">[3]s</a>
 push_tag=предаде маркер <a href="%s/src/%s">%[2]s</a> към <a href="%[1]s">[3]s</a>
 delete_tag=изтри етикет <code>%[2]s</code> % <a href="%[1]s">[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=преди

conf/locale/locale_cs-CZ.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Již máte účet? Přihlašte se!
 social_register_hepler_msg=Již máte účet? Připojte se!
 disable_register_prompt=Omlouváme se, ale registrace jsou vypnuty. Kontaktujte správce systému.
 disable_register_mail=Omlouváme se, ale e-mailové služby jsou vypnuté. Kontaktujte správce systému.
+auth_source=Authentication Source
+local=Local
 remember_me=Zapamatovat si mne
 forgot_password=Zapomenuté heslo
 forget_password=Zapomněli jste heslo?
@@ -229,6 +231,7 @@ org_name_been_taken=Název organizace je již obsazen.
 team_name_been_taken=Název týmu je již obsazen.
 email_been_used=E-mailová adresa je již použita.
 username_password_incorrect=Chybné uživatelské jméno nebo heslo.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Ujistěte se, prosím, že zadaný název repositáře je správný.
 enterred_invalid_owner_name=Ujistěte se, prosím, že jméno vlastníka je zadáno správně.
 enterred_invalid_password=Ujistěte se, prosím, že zadané heslo je správné.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Nebo zadejte tajný kód:
 two_factor_then_enter_passcode=Pak zadejte přístupový kód:
 two_factor_verify=Ověřit
 two_factor_invalid_passcode=Zadaný přístupový kód není platný, prosím, zkuste to znova!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Povolení dvoufaktorového ověření selhalo: %v
 two_factor_enable_success=Dvoufaktorové ověření bylo pro váš účet povoleno!
 two_factor_recovery_codes_title=Obnovovací kódy dvoufaktorového ověření
@@ -819,10 +823,10 @@ settings.event_push=Odeslat
 settings.event_push_desc=Odeslání pomocí Gitu do repositáře
 settings.event_issues=Úkoly
 settings.event_issues_desc=Úkol, který je otevřen, uzavřen, znovuotevřen, změněn, přiřazen, nepřiřazen, mající změněn štítek, smazán štítek, mající přiřazen milník, nemající přiřazen milník.
-settings.event_issue_comment=Komentář k úkolu
-settings.event_issue_comment_desc=Komentář k úkolu vytvořen, upraven nebo smazán.
 settings.event_pull_request=Požadavek na natažení
 settings.event_pull_request_desc=Požadavek na natažení otevřen, uzavřen, znovuotevřen, změněn, přiřazen, nepřiřazen, změněn štítek, smazán štítek, mající nastaven štítek, zrušeno nastavení štítku nebo synchronizován.
+settings.event_issue_comment=Komentář k úkolu
+settings.event_issue_comment_desc=Komentář k úkolu vytvořen, upraven nebo smazán.
 settings.event_release=Vydání
 settings.event_release_desc=Vydání vystaveno v repositáři.
 settings.active=Aktivní
@@ -1087,7 +1091,7 @@ repos.stars=Oblíbení
 repos.issues=Úkoly
 repos.size=Velikost
 
-auths.auth_manage_panel=Panel správy způsobů ověřování
+auths.auth_sources=Authentication Sources
 auths.new=Přidat nový zdroj
 auths.name=Název
 auths.type=Typ
@@ -1128,7 +1132,6 @@ auths.enable_tls=Povolit šifrování TLS
 auths.skip_tls_verify=Přeskočit ověření TLS
 auths.pam_service_name=Název služby PAM
 auths.enable_auto_register=Povolit zaregistrování se
-auths.tips=Tipy
 auths.edit=Upravit nastavení ověřování
 auths.activated=Tento způsob ověřování je aktivní
 auths.new_success=Nový způsob ověřování '%s' byl přidán.
@@ -1284,7 +1287,6 @@ notices.delete_success=Systémová upozornění byla smazána.
 
 [action]
 create_repo=vytvořil repositář <a href="%s">%s</a>
-fork_repo=rozštěpil repositář do <a href="%s">%s</a>
 rename_repo=přejmenoval repositář z <code>%[1]s</code> na <a href="%[2]s">%[3]s</a>
 commit_repo=odeslal do větve <a href="%[1]s/src/%[2]s">%[3]s</a> v repositáři <a href="%[1]s">%[4]s</a>
 compare_commits=Zobrazit porovnání pro tyto %d revize
@@ -1301,6 +1303,10 @@ create_branch=vytvořil novou větev <a href="%[1]s/src/%[2]s">%[3]s</a> v <a hr
 delete_branch=smazal větev <code>%[2]s</code> v <a href="%[1]s">%[3]s</a>
 push_tag=odeslal značku <a href="%s/src/%s">%[2]s</a> do repositáře <a href="%[1]s">%[3]s</a>
 delete_tag=smazána značka <code>%[2]s</code> v <a href="%[1]s">%[3]s</a>
+fork_repo=rozštěpil repositář do <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=před

conf/locale/locale_de-DE.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Haben Sie bereits ein Konto? Jetzt anmelden!
 social_register_hepler_msg=Haben Sie bereits ein Konto? Jetzt verknüpfen!
 disable_register_prompt=Es tut uns leid, die Registrierung wurde deaktiviert. Bitte wenden Sie sich an den Administrator.
 disable_register_mail=Es tut uns leid, die Bestätigung der Registrierungs-E-Mail wurde deaktiviert.
+auth_source=Authentication Source
+local=Local
 remember_me=Angemeldet bleiben
 forgot_password=Passwort vergessen
 forget_password=Passwort vergessen?
@@ -229,6 +231,7 @@ org_name_been_taken=Organisationsname ist bereits vergeben.
 team_name_been_taken=Teamname ist bereits vergeben.
 email_been_used=E-Mail-Adresse wird bereits verwendet.
 username_password_incorrect=Benutzername oder Passwort ist nicht korrekt.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Bitte achten Sie darauf, dass der von Ihnen eingegebene Repository-Name korrekt ist.
 enterred_invalid_owner_name=Bitte achten Sie darauf, dass der eingegebene Name des Besitzers korrekt ist.
 enterred_invalid_password=Bitte achten Sie darauf, dass das eingegebene Passwort richtig ist.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Oder geben Sie Ihren Geheim-Code ein:
 two_factor_then_enter_passcode=Geben Sie die PIN ein:
 two_factor_verify=Bestätigen
 two_factor_invalid_passcode=Die eingegebene PIN ist ungültig. Bitte versuchen Sie es erneut!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Einschalten der Zwei-Faktor-Authentifizierung ist fehlgeschlagen: %v
 two_factor_enable_success=Die Zwei-Faktor-Authentifizierung wurde für Ihr Konto erfolgreich aktiviert!
 two_factor_recovery_codes_title=Zwei-Faktor-Authentifizierung-Wiederherstellungscodes
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push auf ein Repository
 settings.event_issues=Issues
 settings.event_issues_desc=Issue geöffnet, geschlossen, wieder geöffnet, bearbeitet, zugewiesen, nicht zugewiesen, Label aktualisiert, Label gelöscht, einem Meilenstein zugewiesen oder davon entfernt.
-settings.event_issue_comment=Issue-Kommentar
-settings.event_issue_comment_desc=Issue-Kommentar angelegt, geändert oder gelöscht.
 settings.event_pull_request=Pull-Request
 settings.event_pull_request_desc=Pull-Request geöffnet, geschlossen, wieder geöffnet, bearbeitet, zugewiesen, nicht zugewiesen, Label aktualisiert, Label gelöscht, einem Meilenstein zugewiesen, davon entfernt oder synchronisiert.
+settings.event_issue_comment=Issue-Kommentar
+settings.event_issue_comment_desc=Issue-Kommentar angelegt, geändert oder gelöscht.
 settings.event_release=Release
 settings.event_release_desc=Release in Repository veröffentlicht.
 settings.active=Aktiv
@@ -1087,7 +1091,7 @@ repos.stars=Favoriten
 repos.issues=Issues
 repos.size=Größe
 
-auths.auth_manage_panel=Authentifizierung
+auths.auth_sources=Authentication Sources
 auths.new=Neue Quelle hinzufügen
 auths.name=Name
 auths.type=Typ
@@ -1128,7 +1132,6 @@ auths.enable_tls=TLS-Verschlüsselung aktivieren
 auths.skip_tls_verify=TLS-Prüfung überspringen
 auths.pam_service_name=PAM Dienstname
 auths.enable_auto_register=Automatische Registrierung aktivieren
-auths.tips=Tipps
 auths.edit=Authentifizierungseinstellungen bearbeiten
 auths.activated=Diese Authentifizierung ist aktiv
 auths.new_success=Neue Authentifizierung '%s' wurde erfolgreich hinzugefügt.
@@ -1284,7 +1287,6 @@ notices.delete_success=Systemmitteilungen wurden erfolgreich gelöscht.
 
 [action]
 create_repo=hat das Repository <a href="%s">%s</a> erstellt
-fork_repo=hat das Repository nach <a href="%s">%s</a> geforkt
 rename_repo=hat das Repository von <code>%[1]s</code> zu <a href="%[2]s">%[3]s</a> umbenannt
 commit_repo=hat auf <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%[1]s">%[4]s</a> gepusht
 compare_commits=Zeige Vergleich für diese %d Commits
@@ -1301,6 +1303,10 @@ create_branch=hat neuen Branch <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%
 delete_branch=hat Branch <code>%[2]s</code> in <a href="%[1]s">%[3]s</a> gelöscht
 push_tag=hat Tag <a href="%s/src/%s">%[2]s</a> auf <a href="%[1]s">%[3]s</a> gepusht
 delete_tag=hat Tag <code>%[2]s</code> in <a href="%[1]s">%[3]s</a> gelöscht
+fork_repo=hat das Repository nach <a href="%s">%s</a> geforkt
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=vor

conf/locale/locale_en-GB.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Already have an account? Sign in now!
 social_register_hepler_msg=Already have an account? Bind now!
 disable_register_prompt=Sorry, registration has been disabled. Please contact the site administrator.
 disable_register_mail=Sorry, Register Mail Confirmation has been disabled.
+auth_source=Authentication Source
+local=Local
 remember_me=Remember Me
 forgot_password=Forgot Password
 forget_password=Forgot password?
@@ -229,6 +231,7 @@ org_name_been_taken=Organisation name has already been taken.
 team_name_been_taken=Team name has already been taken.
 email_been_used=Email address has already been used.
 username_password_incorrect=Username or password is not correct.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Please make sure that the repository name you have entered is correct.
 enterred_invalid_owner_name=Please make sure that the owner name you have entered is correct.
 enterred_invalid_password=Please make sure the that password you have entered is correct.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=Then enter passcode:
 two_factor_verify=Verify
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push to a repository
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Active
@@ -1087,7 +1091,7 @@ repos.stars=Stars
 repos.issues=Issues
 repos.size=Size
 
-auths.auth_manage_panel=Authentication Manage Panel
+auths.auth_sources=Authentication Sources
 auths.new=Add New Source
 auths.name=Name
 auths.type=Type
@@ -1128,7 +1132,6 @@ auths.enable_tls=Enable TLS Encryption
 auths.skip_tls_verify=Skip TLS Verify
 auths.pam_service_name=PAM Service Name
 auths.enable_auto_register=Enable Auto Registration
-auths.tips=Tips
 auths.edit=Edit Authentication Setting
 auths.activated=This authentication is activated
 auths.new_success=New authentication '%s' has been added successfully.
@@ -1284,7 +1287,6 @@ notices.delete_success=System notices have been deleted successfully.
 
 [action]
 create_repo=created repository <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=renamed repository from <code>%[1]s</code> to <a href="%[2]s">%[3]s</a>
 commit_repo=pushed to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
 compare_commits=View comparison for these %d commits
@@ -1301,6 +1303,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=pushed tag <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=ago

conf/locale/locale_es-ES.ini

@@ -151,6 +151,8 @@ register_hepler_msg=¿Ya tienes una cuenta? ¡Inicia sesión!
 social_register_hepler_msg=¿Ya tienes una cuenta? ¡Enlázala!
 disable_register_prompt=Lo sentimos, el registro está deshabilitado. Por favor, contacta con el administrador del sitio.
 disable_register_mail=Lo sentimos. Los correos de Confirmación de Registro están deshabilitados.
+auth_source=Authentication Source
+local=Local
 remember_me=Recuérdame
 forgot_password=He olvidado mi contraseña
 forget_password=¿Has olvidado tu contraseña?
@@ -229,6 +231,7 @@ org_name_been_taken=Ya existe una organización con este nombre.
 team_name_been_taken=Ya existe un equipo con este nombre.
 email_been_used=Esta dirección de correo electrónico ya está en uso.
 username_password_incorrect=Nombre de usuario o contraseña incorrectos.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Por favor, asegúrate de que has introducido correctamente el nombre del repositorio.
 enterred_invalid_owner_name=Por favor, asegúrate de que has introducido correctamente el nombre del propietario.
 enterred_invalid_password=Por favor, asegúrate de que has introducido correctamente tu contraseña.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=Introduce el Pin:
 two_factor_verify=Verificar
 two_factor_invalid_passcode=¡El Pin que has introducido no es válido, por favor, inténtalo de nuevo!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push a un repositorio
 settings.event_issues=Incidencias
 settings.event_issues_desc=Incidencia abierta, cerrada, reabierta, editada, asignada, desasignada, etiqueta actualizada, etiqueta limpiada, hito marcado, o desmarcado,.
-settings.event_issue_comment=Comentario de incidencia
-settings.event_issue_comment_desc=Comentario de incidencias creado, editado o borrado.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request abierto, cerrado, reabierto, editado, asignado, desasignado, etiqueta actualizada, etiqueta limpiada, hito marcado, hito desmarcado, o sincronizado.
+settings.event_issue_comment=Comentario de incidencia
+settings.event_issue_comment_desc=Comentario de incidencias creado, editado o borrado.
 settings.event_release=Lanzamiento
 settings.event_release_desc=Lanzamiento publicado en un repositorio.
 settings.active=Activo
@@ -1087,7 +1091,7 @@ repos.stars=Estrellas
 repos.issues=Incidencias
 repos.size=Tamaño
 
-auths.auth_manage_panel=Panel de administración de autenticación
+auths.auth_sources=Authentication Sources
 auths.new=Añadir nuevo origen
 auths.name=Nombre
 auths.type=Tipo
@@ -1128,7 +1132,6 @@ auths.enable_tls=Habilitar cifrado TLS
 auths.skip_tls_verify=Omitir la verificación TLS
 auths.pam_service_name=Nombre del Servicio PAM
 auths.enable_auto_register=Hablilitar Auto-Registro
-auths.tips=Consejos
 auths.edit=Editar la Configuración de Autenticación
 auths.activated=Esta autenticación ha sido activada
 auths.new_success=¡La autenticación '%s' ha sido añadida con éxito!
@@ -1284,7 +1287,6 @@ notices.delete_success=Las notificaciones del sistema han sido eliminadas satisf
 
 [action]
 create_repo=creó el repositorio <a href="%s">%s</a>
-fork_repo=ha hecho un Fork en <a href="%s">%s</a>
 rename_repo=repositorio renombrado de <code>%[1]s</code> a <a href="%[2]s">%[3]s</a>
 commit_repo=hizo push a <a href="%[1]s/src/%[2]s">%[3]s</a> en <a href="%[1]s">%[4]s</a>
 compare_commits=Ver comparación de estos %d commits
@@ -1301,6 +1303,10 @@ create_branch=nueva rama <a href="%[1]s/src/%[2]s">%[3]s</a> creada en <a href="
 delete_branch=borrada rama <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=hizo push del tag <a href="%s/src/%s">%[2]s</a> a <a href="%[1]s">%[3]s</a>
 delete_tag=borrada etiqueta <code>%[2]s</code> en <a href="%[1]s">%[3]s</a>
+fork_repo=ha hecho un Fork en <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=hace

conf/locale/locale_fa-IR.ini

@@ -151,6 +151,8 @@ register_hepler_msg=قبلا ثبت نام کردید؟ از اینجا وارد
 social_register_hepler_msg=تا به حال حسابی داشته اید؟ به ما بپیوندید!
 disable_register_prompt=با عرض پوزش، ثبت نام غیرفعال شده است. لطفا با مدیر سایت تماس بگیرید.
 disable_register_mail=با عرض پوزش، تایید ایمیل ثبت نام غیر فعال شده است.
+auth_source=Authentication Source
+local=Local
 remember_me=مرا به خاطر بسپار
 forgot_password=فراموشی رمز عبور
 forget_password=رمز عبور خود را فراموش کرده‌اید؟
@@ -229,6 +231,7 @@ org_name_been_taken=نام سازمان قبلا استفاده شده است.
 team_name_been_taken=نام تیم گرفته شده است.
 email_been_used=آدرس ایمیل قبلا استفاده شده است.
 username_password_incorrect=نام کاربری یا رمز عبور صحیح نیست.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=لطفا مطمئن شوید که نام مخزن وارد شده صحیح است.
 enterred_invalid_owner_name=لطفا مطمئن شوید که نام مالک وارد شده صحیح است.
 enterred_invalid_password=لطفا مطمئن شوید که رمز عبور وارد شده صحیح است.
@@ -350,6 +353,7 @@ two_factor_or_enter_secret=و یا رمز را پارد کنید:
 two_factor_then_enter_passcode=سپس رمز عبور را وارد کنید:
 two_factor_verify=تایید‌کنید
 two_factor_invalid_passcode=رمز عبور وارد شده معتبر نیست, لطفا دوباره سعی کنید!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=فعال کردن احراز هویت دوگانه ناموفق بود: %v
 two_factor_enable_success=احراز هویت دوگانه با موفقیت برای حساب شما فعال شد!
 two_factor_recovery_codes_title=کدهای بازیابی احراز هویت دوگانه
@@ -821,10 +825,10 @@ settings.event_push=درج کردن
 settings.event_push_desc=درج در مخزن توسط گیت
 settings.event_issues=مسائل
 settings.event_issues_desc=مسئله ای باز شده ، بسته شده، بازگشایی شده، ویرایش شده، به فردی تخصیص یافته، لغو تخصیص از فردی شده، برچسب آن به روزرسانی شده، برچسب آن پاک شده، نقطه عطف برای آن تعیین شده یا نقطه عطف از آن حذف شده.
-settings.event_issue_comment=نظرات در مسئله
-settings.event_issue_comment_desc=نظر در مسئله ایجاد شد، ویرایش شد یا حذف شد.
 settings.event_pull_request=درخواست ادغام
 settings.event_pull_request_desc=Pull request باز، بسته، بازگشایی شده، ویرایش شده، تخصیص داده به فردی، لغو تخصیص از فرد شده، برچسب آن به روز شده، برچسبی برای آن ساخته شده، نقطه عطف برای آن تعیین شده، نقطه عطف تعیین شده آن حذف شده، یا همگام سازی شده.
+settings.event_issue_comment=نظرات در مسئله
+settings.event_issue_comment_desc=نظر در مسئله ایجاد شد، ویرایش شد یا حذف شد.
 settings.event_release=انتشار نسخه
 settings.event_release_desc=Release در مخزن منتشر شد.
 settings.active=فعال
@@ -1089,7 +1093,7 @@ repos.stars=ستاره ها
 repos.issues=مسائل
 repos.size=اندازه
 
-auths.auth_manage_panel=پنل مدیریت سیستم احراز هویت
+auths.auth_sources=Authentication Sources
 auths.new=اضافه کردن منبع جدید
 auths.name=نام
 auths.type=نوع
@@ -1130,7 +1134,6 @@ auths.enable_tls=فعال کردن رمزگذاری TLS
 auths.skip_tls_verify=صرف نظر از اعتبار سنجی TLS
 auths.pam_service_name=نام سرویس PAM
 auths.enable_auto_register=فعال سازی ثبت نام خودکار
-auths.tips=راهنمایی
 auths.edit=ویرایش تنظیمات تأیید اعتبار
 auths.activated=متد احراز هویت فعال شده است
 auths.new_success=متد احرازهویت %s با موفقیت افزوده شد.
@@ -1286,7 +1289,6 @@ notices.delete_success=اخطار های سیستم با موفقیت حذف ش
 
 [action]
 create_repo=مخزن ایجاد شده <a href="%s"> %s</a>
-fork_repo=انشعاب مخزن به <a href="%s"> %s</a>
 rename_repo=مخزن تغییر نام داد از <code>%[1]s</code> به <a href="%[2]s">%[3]s</a>
 commit_repo=پوش کردن به <a href="%[1]s/src/%[2]s">%[3]s</a> در <a href="%[1]s">%[4]s</a>
 compare_commits=مشاهده مقایسه برای کامیت %d
@@ -1303,6 +1305,10 @@ create_branch=شاخه ی جدید <a href="%[1]s/src/%[2]s">%[3]s</a>در<a hre
 delete_branch=شاخه ی حذف شده ی <code>%[2]s</code> در<a href="%[1]s">%[3]s</a>
 push_tag=تگ <a href="%s/src/%s">%[2]s</a>در <a href="%[1]s">%[3]s</a>پوش شد
 delete_tag=برچسب <code>%[2]s</code> در <a href="%[1]s">%[3]s</a> حذف شده
+fork_repo=انشعاب مخزن به <a href="%s"> %s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=پیش

conf/locale/locale_fi-FI.ini

@@ -151,6 +151,8 @@ register_hepler_msg=On jo tili? Kirjaudu sisään nyt!
 social_register_hepler_msg=On jo tili? Liitä nyt!
 disable_register_prompt=Sori, rekisteröinti on poistettu käytöstä. Ole hyvä ja ota yhteyttä sivuston ylläpitoon.
 disable_register_mail=Sori, rekisteröinti sähköpostivarmistukset on poistettu käytöstä.
+auth_source=Authentication Source
+local=Local
 remember_me=Muista minut
 forgot_password=Unohtuiko salasana
 forget_password=Unohtuiko salasana?
@@ -229,6 +231,7 @@ org_name_been_taken=Organisaation nimi on jo käytössä.
 team_name_been_taken=Tiimin nimi on jo käytössä.
 email_been_used=Sähköpostiosoite on jo käytössä.
 username_password_incorrect=Käyttäjätunnus tai salasana ei ole oikein.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Ole hyvä ja varmista että kirjoittamasi repon nimi on oikein.
 enterred_invalid_owner_name=Ole hyvä ja varmista että kirjoittamasi omistajan nimi on oikein.
 enterred_invalid_password=Ole hyvä ja varmista että kirjoittamasi salasana on oikein.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Tai kirjoita salaisuus:
 two_factor_then_enter_passcode=Sitten kirjoita salasana:
 two_factor_verify=Vahvista
 two_factor_invalid_passcode=Kirjoittamasi salasana ei kelpaa, yritä uudelleen!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Ota käyttöön kaksivaiheinen todennus epäonnistui: %v
 two_factor_enable_success=Kaksivaiheinen todennus on otettu käyttöön tilissäsi menestyksekkäästi!
 two_factor_recovery_codes_title=Kaksivaiheinen todennus palautuskoodit
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push repoon
 settings.event_issues=Ongelmat
 settings.event_issues_desc=Ongelma avattu, suljettu, uudelleenavattu, muokattu, annettu, anto vedottu, tarra päivitetty, tarra poistettu, merkkipaalutettu, tai poistettu merkkipaalu.
-settings.event_issue_comment=Ongelman kommentti
-settings.event_issue_comment_desc=Ongelman kommentti luotu, muokattu, tai poistettu.
 settings.event_pull_request=Pull-pyyntö
 settings.event_pull_request_desc=Pull-pyyntö avattu, suljettu, uudelleenavattu, muokattu, annettu, anto vedottu, tarra päivitetty, tarra poistettu, merkkipaalutettu, poistettu merkkipaalu, tai synkronoitu.
+settings.event_issue_comment=Ongelman kommentti
+settings.event_issue_comment_desc=Ongelman kommentti luotu, muokattu, tai poistettu.
 settings.event_release=Julkaisu
 settings.event_release_desc=Julkaisu julkaistu repoon.
 settings.active=Aktiivinen
@@ -1087,7 +1091,7 @@ repos.stars=Äänet
 repos.issues=Ongelmat
 repos.size=Koko
 
-auths.auth_manage_panel=Todennus hallintapaneeli
+auths.auth_sources=Authentication Sources
 auths.new=Lisää uusi lähde
 auths.name=Nimi
 auths.type=Tyyppi
@@ -1128,7 +1132,6 @@ auths.enable_tls=Ota käyttöön TLS-salaus
 auths.skip_tls_verify=Ohita TLS tarkistaminen
 auths.pam_service_name=PAM palvelun nimi
 auths.enable_auto_register=Ota käyttöön automaattinen rekisteröinti
-auths.tips=Vinkit
 auths.edit=Muokkaa todennusasetusta
 auths.activated=Tämä todennus on aktivoitu
 auths.new_success=Uusi todennus '%s' on luotu onnistuneesti.
@@ -1284,7 +1287,6 @@ notices.delete_success=Järjestelmän ilmoitukset on poistettu onnistuneesti.
 
 [action]
 create_repo=luotu repo <a href="%s">%s</a>
-fork_repo=forkattu repo kohteeseen <a href="%s"> %s</a>
 rename_repo=uudelleennimetty repo <code>%[1]s</code> nimelle <a href="%[2]s">%[3]s</a>
 commit_repo=pushattu kohteeseen <a href="%[1]s/src/%[2]s">%[3]s</a> paikassa <a href="%[1]s">%[4]s</a>
 compare_commits=Näytä vertailu näille %d commiteille
@@ -1301,6 +1303,10 @@ create_branch=luotu uusi haara <a href="%[1]s/src/%[2]s">%[3]s</a> kohteeseen <a
 delete_branch=poistettu haara <code>%[2]s</code> kohteesta <a href="%[1]s">%[3]s</a>
 push_tag=pushattu tagi <a href="%s/src/%s">%[2]s</a> kohteeseen <a href="%[1]s">%[3]s</a>
 delete_tag=poistettu tagi <code>%[2]s</code> kohteesta <a href="%[1]s">%[3]s</a>
+fork_repo=forkattu repo kohteeseen <a href="%s"> %s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=sitten

conf/locale/locale_fr-FR.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Déjà enregistré ? Connectez-vous !
 social_register_hepler_msg=Déjà enregistré ? Associez-le !
 disable_register_prompt=Désolé, les enregistrements ont été désactivés. Veuillez contacter l'administrateur du site.
 disable_register_mail=Désolé, la confirmation par courriel des enregistrements a été désactivée.
+auth_source=Authentication Source
+local=Local
 remember_me=Se souvenir de moi
 forgot_password=Mot de passe oublié
 forget_password=Mot de passe oublié ?
@@ -229,6 +231,7 @@ org_name_been_taken=Nom d'organisation déjà pris.
 team_name_been_taken=Nom d'équipe déjà pris.
 email_been_used=Adresse e-mail déjà utilisée.
 username_password_incorrect=Nom d'utilisateur ou mot de passe incorrect.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Veuillez vérifier que le nom saisi du dépôt soit correct.
 enterred_invalid_owner_name=Veuillez vérifier que le nom du propriétaire saisi soit correct.
 enterred_invalid_password=Veuillez vérifier que le mot de passe saisi soit correct.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Ou entrez la phrase secrète :
 two_factor_then_enter_passcode=Puis entrez le mot de passe :
 two_factor_verify=Vérifier
 two_factor_invalid_passcode=Le mot de passe que vous avez entré n'est pas valide, veuillez réessayer.
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=L'activation de l'authentification en deux étapes a échoué : %v
 two_factor_enable_success=L'authentification en deux étapes a été bien été activée pour votre compte.
 two_factor_recovery_codes_title=Codes de secours pour l'authentification en deux étapes
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push vers un dépôt
 settings.event_issues=Tickets
 settings.event_issues_desc=Ticket ouvert, fermé, réouvert, modifié, assigné, non-assigné, étiquette mise à jour, étiquette nettoyée, jalonnée, ou déjalonnée.
-settings.event_issue_comment=Commentaire du ticket
-settings.event_issue_comment_desc=Commentaire du ticket créé, modifié, ou supprimé.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull requests ouverte, fermée, réouverte, modifiée, assignée, non-assignée, étiquette mise à jour, étiquette nettoyée, jalonnée, déjalonnée, ou synchronisée.
+settings.event_issue_comment=Commentaire du ticket
+settings.event_issue_comment_desc=Commentaire du ticket créé, modifié, ou supprimé.
 settings.event_release=Version publiée
 settings.event_release_desc=Version publiée dans un dépôt.
 settings.active=Actif
@@ -1087,7 +1091,7 @@ repos.stars=Votes
 repos.issues=Tickets
 repos.size=Taille
 
-auths.auth_manage_panel=Panel d'administration des authentifications
+auths.auth_sources=Authentication Sources
 auths.new=Ajouter une nouvelle source d'authentification
 auths.name=Nom
 auths.type=Type
@@ -1128,7 +1132,6 @@ auths.enable_tls=Activer le Chiffrement TLS
 auths.skip_tls_verify=Ne pas vérifier TLS
 auths.pam_service_name=Nom du Service PAM
 auths.enable_auto_register=Connexion Automatique
-auths.tips=Conseils
 auths.edit=Modifier les paramètres d'authentification
 auths.activated=Authentification activée
 auths.new_success=Nouvelle authentification «%s » a été ajoutée avec succès.
@@ -1284,7 +1287,6 @@ notices.delete_success=Notifications système supprimées avec succès.
 
 [action]
 create_repo=a créé le dépôt <a href="%s">%s</a>
-fork_repo=a créé sa branche du dépôt vers <a href="%s">%s</a>
 rename_repo=a rebaptisé le dépôt de <code>%[1]s</code> vers <a href="%[2]s">%[3]s</a>
 commit_repo=a commité dans <a href="%[1]s/src/%[2]s">%[3]s</a> sur <a href="%[1]s">%[4]s</a>
 compare_commits=Comparer ces %d commits
@@ -1301,6 +1303,10 @@ create_branch=nouvelle branche créée <a href="%[1]s/src/%[2]s">%[3]s</a> sur <
 delete_branch=branche supprimée <code>%[2]s</code> sur <a href="%[1]s">%[3]s</a>
 push_tag=a soumis le tag <a href="%s/src/%s">%[2]s</a> sur <a href="%[1]s">%[3]s</a>
 delete_tag=étiquette supprimée <code>%[2]s</code> sur <a href="%[1]s">%[3]s</a>
+fork_repo=a créé sa branche du dépôt vers <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=il y a

conf/locale/locale_gl-ES.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Xa tes unha conta? Inicia sesión!
 social_register_hepler_msg=Xa tes unha conta? Enlázaa!
 disable_register_prompt=Sentímolo, o rexistro está deshabilitado. Por favor, contacta co administrador do sitio.
 disable_register_mail=Sentímolo. Os correos de confirmación de rexistro están deshabilitados.
+auth_source=Authentication Source
+local=Local
 remember_me=Recórdame
 forgot_password=Esquecín o meu contrasinal
 forget_password=Esqueciches o teu contrasinal?
@@ -229,6 +231,7 @@ org_name_been_taken=Xa existe unha organización con este nome.
 team_name_been_taken=Xa existe un equipo con este nome.
 email_been_used=Este enderezo de correo electrónico xa está en uso.
 username_password_incorrect=Nome de usuario ou contrasinal incorrectos.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Por favor, asegúrate de que introduciches correctamente o nome do repositorio.
 enterred_invalid_owner_name=Por favor, asegúrate de que introduciches correctamente o nome do propietario.
 enterred_invalid_password=Por favor, asegúrate de que introduciches correctamente o teu contrasinal.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=Then enter passcode:
 two_factor_verify=Verify
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push a un repositorio
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Activo
@@ -1087,7 +1091,7 @@ repos.stars=Estrelas
 repos.issues=Incidencias
 repos.size=Size
 
-auths.auth_manage_panel=Panel de administración de autenticación
+auths.auth_sources=Authentication Sources
 auths.new=Engadir nova orixe
 auths.name=Nome
 auths.type=Tipo
@@ -1128,7 +1132,6 @@ auths.enable_tls=Habilitar cifrado TLS
 auths.skip_tls_verify=Omitir a verificación TLS
 auths.pam_service_name=Nome do servizo PAM
 auths.enable_auto_register=Habilitar auto-rexistro
-auths.tips=Consellos
 auths.edit=Editar a configuración de autenticación
 auths.activated=Esta autenticación foi activada
 auths.new_success=A autenticación '%s' foi engadida con éxito!
@@ -1284,7 +1287,6 @@ notices.delete_success=As notificacións do sistema foron eliminadas satisfactor
 
 [action]
 create_repo=creou o repositorio <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=repositorio renomeado de <code>%[1]s</code> a <a href="%[2]s">%[3]s</a>
 commit_repo=fixo push a <a href="%[1]s/src/%[2]s">%[3]s</a> en <a href="%[1]s">%[4]s</a>
 compare_commits=Ver comparación destas %d achegas
@@ -1301,6 +1303,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=fixo push do tag <a href="%s/src/%s">%[2]s</a> a <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=hai

conf/locale/locale_hu-HU.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Van már felhasználói fiókja? Jelentkezz be!
 social_register_hepler_msg=Van már fiókod? Csatold most!
 disable_register_prompt=Elnézést, a regisztrációt kikapcsolták. Kérlek szólj az oldal adminisztrátorának.
 disable_register_mail=Elnézést, az email regisztráció megerősítését kikapcsolták.
+auth_source=Authentication Source
+local=Local
 remember_me=Emlékezz rám
 forgot_password=Elfelejtett jelszó
 forget_password=Elfelejtette a jelszavát?
@@ -229,6 +231,7 @@ org_name_been_taken=A szervezet neve már foglalt.
 team_name_been_taken=Az a csapatnév már foglalt.
 email_been_used=Ezt az email címet már felhasználták.
 username_password_incorrect=Felhasználó név vagy jelszó hibás.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Kérjük, ellenőrizze, hogy a tároló neve helyes.
 enterred_invalid_owner_name=Kérjük, ellenőrizze, hogy a tulajdonos neve helyes.
 enterred_invalid_password=Kérlek ellenőrizd, hogy a beírt jelszó helyes.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Vagy adja meg a titkos kódot:
 two_factor_then_enter_passcode=Ezután írja be ezt a jelkódot:
 two_factor_verify=Ellenőrzés
 two_factor_invalid_passcode=Érvénytelen a megadott jelkód, próbálja meg újra!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Kétlépcsős hitelesítés engedélyezése sikertelen: %v
 two_factor_enable_success=Kétlépcsős hitelesítés sikeresen engedélyezve a fiókjához!
 two_factor_recovery_codes_title=Kettőlépcsős hitelesítés helyreállítási kódok
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Push-olás egy repository-ba
 settings.event_issues=Problémák
 settings.event_issues_desc=A probléma meg left nyitva, le left zárva, újranyitva, szerkesztve, hozzárendelve, visszarendelve, cimkézve, cimketelenítve, mérföldkövezve, vagy mérföldkőtelenítve.
-settings.event_issue_comment=Probléma hozzászólás
-settings.event_issue_comment_desc=Probléma megjegyzés létrehozva, szerkesztve vagy törölve.
 settings.event_pull_request=Beolvasztási kérés
 settings.event_pull_request_desc=Beolvasztási kérés megnyitva, lezárva, újranyitva, hozzárendelve, visszarendelve, címkézve, címke eltávolítva, mérföldkövezve, mérföldkő eltávolítva vagy szinkronizálva.
+settings.event_issue_comment=Probléma hozzászólás
+settings.event_issue_comment_desc=Probléma megjegyzés létrehozva, szerkesztve vagy törölve.
 settings.event_release=Kiadás
 settings.event_release_desc=Kiadás publikálva a tárolóban.
 settings.active=Aktív
@@ -1087,7 +1091,7 @@ repos.stars=Csillagok
 repos.issues=Problémák
 repos.size=Méret
 
-auths.auth_manage_panel=Hitelesítés kezelő Panel
+auths.auth_sources=Authentication Sources
 auths.new=Új forrás hozzáadása
 auths.name=Név
 auths.type=Típus
@@ -1128,7 +1132,6 @@ auths.enable_tls=TLS titkosítás engedélyezése
 auths.skip_tls_verify=TLS ellenőrzése mellőzése
 auths.pam_service_name=PAM szolgáltatás neve
 auths.enable_auto_register=Automatikus regisztráció engedélyezése
-auths.tips=Tippek
 auths.edit=Hitelesítési beállítások szerkesztése
 auths.activated=Ez a hitelesítés mód aktiválva van
 auths.new_success=Az új hitelesítési mód '%s' sikeresen hozzáadva.
@@ -1284,7 +1287,6 @@ notices.delete_success=A rendszer értesítések sikeresen törölve.
 
 [action]
 create_repo=létrehozott tárolót: <a href="%s"> %s</a>
-fork_repo=lemásolta a(z) <a href="%s">%s</a> tárolót
 rename_repo=átnevezte a <code>%[1]s</code> tárolót <a href="%[2]s">%[3]s</a>-ra
 commit_repo=feltöltött a <a href="%[1]s/src/%[2]s">%[3]s</a> ágba ide: <a href="%[1]s">%[4]s</a>
 compare_commits=%d commit összehasonlítása
@@ -1301,6 +1303,10 @@ create_branch=létrehozott egy új <a href="%[1]s/src/%[2]s">%[3]s</a> ágat ebb
 delete_branch=törölt egy ágat <code>%[2]s</code> ekkor: <a href="%[1]s">%[3]s</a>
 push_tag=feltöltött egy cimkét: <a href="%s/src/%s">%[2]s</a> ide: <a href="%[1]s">%[3]s</a>
 delete_tag=törölt egy cimkét <code>%[2]s</code> ekkor: <a href="%[1]s">%[3]s</a>
+fork_repo=lemásolta a(z) <a href="%s">%s</a> tárolót
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago= 

conf/locale/locale_id-ID.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Sudah memiliki account? Sign in sekarang!
 social_register_hepler_msg=Sudah memiliki account? Ikat sekarang!
 disable_register_prompt=Maaf, pendaftaran telah dinonaktifkan. Hubungi administrator situs.
 disable_register_mail=Maaf, konfirmasi pendaftaran melalui email telah dinonaktifkan.
+auth_source=Authentication Source
+local=Local
 remember_me=Ingat saya
 forgot_password=Lupa Sandi
 forget_password=Lupa sandi?
@@ -229,6 +231,7 @@ org_name_been_taken=Nama organisasi telah diambil.
 team_name_been_taken=Nama tim telah diambil.
 email_been_used=Alamat email telah digunakan.
 username_password_incorrect=Nama pengguna atau sandi tidak benar.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Pastikan bahwa nama repositori yang Anda masukkan benar.
 enterred_invalid_owner_name=Pastikan bahwa nama pemilik yang Anda masukkan benar.
 enterred_invalid_password=Harap pastikan bahwa sandi yang Anda masukkan benar.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Atau masukkan rahasianya:
 two_factor_then_enter_passcode=Masukan kode akses:
 two_factor_verify=Verifikasi
 two_factor_invalid_passcode=Kode akses yang Anda masukan tidak sah, silahkan coba lagi!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Aktifkan Autentikasi dua faktor gagal: %v
 two_factor_enable_success=Autentikasi dua faktor telah memungkinkan akun Anda berhasil!
 two_factor_recovery_codes_title=Kode Pemulihan Otentikasi dua faktor
@@ -819,10 +823,10 @@ settings.event_push=Dorong
 settings.event_push_desc=Git mendorong ke repositori
 settings.event_issues=Masalah
 settings.event_issues_desc=Masalah dibuka, ditutup, dibuka kembali, diedit, ditugaskan, belum ditetapkan, label diperbarui, label dihapus, dirham, atau demilestoned.
-settings.event_issue_comment=Isu Komentar
-settings.event_issue_comment_desc=Komentar terbitan dibuat, diedit, atau dihapus.
 settings.event_pull_request=Permintaan tarik
 settings.event_pull_request_desc=Tarik permintaan dibuka, ditutup, dibuka kembali, diedit, ditugaskan, belum ditetapkan, label diperbarui, label dibersihkan, dirender, diremilahkan, atau disinkronkan.
+settings.event_issue_comment=Isu Komentar
+settings.event_issue_comment_desc=Komentar terbitan dibuat, diedit, atau dihapus.
 settings.event_release=Melepaskan
 settings.event_release_desc=Rilis diterbitkan dalam repositori.
 settings.active=Aktif
@@ -1087,7 +1091,7 @@ repos.stars=Bintang
 repos.issues=Masalah
 repos.size=Ukuran
 
-auths.auth_manage_panel=Authentication Manage Panel
+auths.auth_sources=Authentication Sources
 auths.new=Tambahkan Sumber Baru
 auths.name=Nama
 auths.type=Mengetik
@@ -1128,7 +1132,6 @@ auths.enable_tls=Enable TLS Encryption
 auths.skip_tls_verify=Skip TLS Verify
 auths.pam_service_name=Nama layanan PAM
 auths.enable_auto_register=Mengaktifkan pendaftaran otomatis
-auths.tips=Cara
 auths.edit=Mengubah pengaturan pembuktian
 auths.activated=This authentication is activated
 auths.new_success=New authentication '%s' has been added successfully.
@@ -1284,7 +1287,6 @@ notices.delete_success=Sistem pemberitahuan telah berhasil dihapus.
 
 [action]
 create_repo=repositori dibuat <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=repositori berganti nama dari <code>%[1]s</code> ke <a href="%[2]s">%[3]s</a>
 commit_repo=didorong ke <a href="%[1]s/src/%[2]s">%[3]s</a> di <a href="%[1]s">%[4]s</a>
 compare_commits=View comparison for these %d commits
@@ -1301,6 +1303,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=pushed tag <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=lalu

conf/locale/locale_it-IT.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Hai già un account? Accedi ora!
 social_register_hepler_msg=Hai già un account? Associalo ora!
 disable_register_prompt=Siamo spiacenti, registrazione è stata disabilitata. Si prega di contattare l'amministratore del sito.
 disable_register_mail=Siamo spiacenti, la conferma di registrazione via Mail è stata disattivata.
+auth_source=Authentication Source
+local=Local
 remember_me=Ricordami
 forgot_password=Password dimenticata
 forget_password=Password dimenticata?
@@ -229,6 +231,7 @@ org_name_been_taken=Il nome dell'Organizzazione è già utlizzato.
 team_name_been_taken=Il nome del Team è già utilizzato.
 email_been_used=L'indirizzo E-mail è già utilizzato.
 username_password_incorrect=Nome utente o password incorretti.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Si prega di assicurarsi che il nome del repository inserito sia corretto.
 enterred_invalid_owner_name=Si prega di assicurarsi che il nome del proprietario inserito sia corretto.
 enterred_invalid_password=Verificare che la  password inserita sia corretta.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=Then enter passcode:
 two_factor_verify=Verifica
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push in un repository
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Attivo
@@ -1087,7 +1091,7 @@ repos.stars=Voti
 repos.issues=Problemi
 repos.size=Size
 
-auths.auth_manage_panel=Pannello di configurazione dei meccanismi di autenticazione
+auths.auth_sources=Authentication Sources
 auths.new=Aggiungi Nuova Origine
 auths.name=Nome
 auths.type=Tipo
@@ -1128,7 +1132,6 @@ auths.enable_tls=Abilitare Crittografia TLS
 auths.skip_tls_verify=Salta verifica TLS
 auths.pam_service_name=Nome del Servizio PAM
 auths.enable_auto_register=Abilitare Registrazione Automatica
-auths.tips=Consigli
 auths.edit=Modifica impostazioni di autenticazione
 auths.activated=Questa Autenticazione è stata attivata
 auths.new_success=Nuovo meccanismo di autenticazione '%s' aggiunto.
@@ -1284,7 +1287,6 @@ notices.delete_success=Gli avvisi di sistema sono stati successivamente eliminat
 
 [action]
 create_repo=ha creato il repository <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=repository rinominato da <code>%[1]s</code> a <a href="%[2]s">[3]s</a>
 commit_repo=ha pushato nel <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%[1]s">%[4]s</a>
 compare_commits=Visualizza comparazione tra questi %d commit
@@ -1301,6 +1303,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=ha pushato il tag <a href="%s/src/%s">%[2]s</a> a <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=fa

conf/locale/locale_ja-JP.ini

@@ -151,6 +151,8 @@ register_hepler_msg=既にアカウントをお持ちですか？今すぐログ
 social_register_hepler_msg=既にアカウントをお持ちですか？連携しましょう！
 disable_register_prompt=申し訳ありませんが、現在登録は受け付けておりません。サイトの管理者にお問い合わせください。
 disable_register_mail=申し訳ありませんが、登録メールの確認機能が無効になっています。
+auth_source=Authentication Source
+local=Local
 remember_me=ログインしたままにする
 forgot_password=パスワードを忘れた
 forget_password=パスワードを忘れましたか？
@@ -229,6 +231,7 @@ org_name_been_taken=組織名は既に使用されています。
 team_name_been_taken=チーム名は既に使用されています。
 email_been_used=電子メール アドレスは既に使用されています。
 username_password_incorrect=ユーザー名またはパスワードが正しくありません。
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=入力したリポジトリの名前が正しいかどうかを確認してください。
 enterred_invalid_owner_name=入力された所有者名が正しいかどうかを確認してください。
 enterred_invalid_password=入力したパスワードが正しいか確認してください。
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=またはシークレットを入力:
 two_factor_then_enter_passcode=パスコードを入力してください:
 two_factor_verify=確認
 two_factor_invalid_passcode=入力されたパスコードは使用できません。もう一度お試しください。
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=2段階認証の有効化に失敗しました: %v
 two_factor_enable_success=2段階認証があなたのアカウントで有効化されました！
 two_factor_recovery_codes_title=2段階認証のリカバリーコード
@@ -819,10 +823,10 @@ settings.event_push=プッシュ
 settings.event_push_desc=リポジトリへのプッシュがされた時
 settings.event_issues=課題
 settings.event_issues_desc=課題の開始・終了・再開・編集・アサイン・アサイン解除・ラベル更新・ラベル削除・マイルストーン紐付け・マイルストーン紐付け解除がされた時
-settings.event_issue_comment=課題へのコメント
-settings.event_issue_comment_desc=課題へのコメントが作成・編集・削除された時
 settings.event_pull_request=プルリクエスト
 settings.event_pull_request_desc=プルリクエストの開始・終了・再開・編集・アサイン・アサイン解除・ラベル更新・ラベル削除・マイルストーン紐付け・マイルストーン紐付け解除・同期がされた時
+settings.event_issue_comment=課題へのコメント
+settings.event_issue_comment_desc=課題へのコメントが作成・編集・削除された時
 settings.event_release=リリース
 settings.event_release_desc=リポジトリでリリースが公開された時
 settings.active=アクティブ
@@ -1087,7 +1091,7 @@ repos.stars=Stars
 repos.issues=課題
 repos.size=容量
 
-auths.auth_manage_panel=認証管理パネル
+auths.auth_sources=Authentication Sources
 auths.new=新しいソースを追加
 auths.name=名前
 auths.type=タイプ
@@ -1128,7 +1132,6 @@ auths.enable_tls=TLS 暗号化を有効にする
 auths.skip_tls_verify=TLSベリファイを省略
 auths.pam_service_name=PAMサービス名
 auths.enable_auto_register=自動登録を有効にする
-auths.tips=ヒント
 auths.edit=認証設定を編集
 auths.activated=認証の有効化
 auths.new_success=新しい認証 '%s' が正常に追加されました。
@@ -1284,7 +1287,6 @@ notices.delete_success=システム通知が正常に削除されました。
 
 [action]
 create_repo=がリポジトリ <a href="%s"> %s</a> を作成しました
-fork_repo=リポジトリを <a href="%s">%s</a> にフォークしました
 rename_repo=が <code>%[1]s</code> から <a href="%[2]s">%[3]s</a> にリポジトリ名を変更しました
 commit_repo=が <a href="%[1]s">%[4]s</a> に <a href="%[1]s/src/%[2]s">%[3]s</a> をプッシュしました
 compare_commits=これらの %d コミットの比較を表示
@@ -1301,6 +1303,10 @@ create_branch=が <a href="%[1]s">%[4]s</a> に新しいブランチ <a href="%[
 delete_branch=<a href="%[1]s">%[3]s</a> のブランチ <code>%[2]s</code> を削除しました
 push_tag=が <a href="%[1]s">%[3]s</a> にタグ <a href="%[1]s/src/%[2]s">%[2]s</a> をプッシュしました
 delete_tag=<a href="%[1]s">%[3]s</a> のタグ <code>%[2]s</code> を削除しました
+fork_repo=リポジトリを <a href="%s">%s</a> にフォークしました
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=前

conf/locale/locale_ko-KR.ini

@@ -151,6 +151,8 @@ register_hepler_msg=이미 계정을 가지고 계신가요? 로그인하세요!
 social_register_hepler_msg=계정을 가지고 계신가요? 연결하세요!
 disable_register_prompt=죄송합니다, 가입이 비활성화 되어있습니다. 사이트 관리자에게 문의 해주세요.
 disable_register_mail=죄송합니다. 메일 등록이 비활성화 되었습니다.
+auth_source=Authentication Source
+local=Local
 remember_me=자동 로그인
 forgot_password=비밀번호 찾기
 forget_password=비밀번호를 잊으셨습니까?
@@ -229,6 +231,7 @@ org_name_been_taken=이미 사용중인 조직 이름입니다.
 team_name_been_taken=이미 사용중인 팀 이름입니다.
 email_been_used=이미 사용중인 이메일 주소입니다.
 username_password_incorrect=사용자 이름이나 비밀번호가 올바르지 않습니다.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=입력한 저장소 이름이 올바른지 확인하십시오.
 enterred_invalid_owner_name=입력한 사용자 이름이 올바른지 확인하십시오.
 enterred_invalid_password=입력한 비밀번호가 올바른지 확인하십시오.
@@ -348,15 +351,16 @@ two_factor_or_enter_secret=또는 이 비밀키를 입력하세요:
 two_factor_then_enter_passcode=그리고 코드를 입력하세요:
 two_factor_verify=확인
 two_factor_invalid_passcode=입력한 코드가 올바르지 않습니다. 다시 시도해 주세요!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=2단계 인증 활성화 실패: %v
 two_factor_enable_success=2단계 인증이 성공적으로 활성화되었습니다!
-two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
-two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
-two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
-two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
+two_factor_recovery_codes_title=2단계 인증 복구 코드
+two_factor_recovery_codes_desc=복구 코드는 당신이 2단계 인증 프로그램에 접근할 수 없을때 사용합니다. 각 코드들은 한 번만 사용될 수 있습니다. <b>이 코드들은 안전한 장소에 보관하세요.</b>
+two_factor_regenerate_recovery_codes=복구 코드 재생성
+two_factor_regenerate_recovery_codes_error=복구 코드 재생성 실패: %v
+two_factor_regenerate_recovery_codes_success=성공적으로 새로운 복구 코드가 생성되었습니다!
 two_factor_disable_title=2단계 인증 비활성화
-two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
+two_factor_disable_desc=2단계 인증을 끄면 보안 수준이 낮아집니다. 계속하시겠습니까?
 two_factor_disable_success=2단계 인증이 성공적으로 비활성화되었습니다!
 
 manage_access_token=개인 액세스 토큰 관리
@@ -472,7 +476,7 @@ file_permalink=고유링크
 file_too_large=이 파일은 표시하기엔 너무 큽니다.
 video_not_supported_in_browser=이 브라우저는 HTML5 비디오 태그를 지원하지 않습니다.
 
-branches.overview=Overview
+branches.overview=개요
 branches.active_branches=활성 브랜치
 branches.stale_branches=오래된 브랜치
 branches.all=모든 브랜치
@@ -820,10 +824,10 @@ settings.event_push=푸시
 settings.event_push_desc=깃 저장소로 푸시
 settings.event_issues=이슈
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=끌어오기 요청
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=활성
@@ -1088,7 +1092,7 @@ repos.stars=Stars
 repos.issues=이슈
 repos.size=Size
 
-auths.auth_manage_panel=인증 관리 패널
+auths.auth_sources=Authentication Sources
 auths.new=새로운 소스를 추가
 auths.name=이름
 auths.type=유형
@@ -1129,7 +1133,6 @@ auths.enable_tls=TLS 암호화 활성화
 auths.skip_tls_verify=TLS 검증 건너뛰기
 auths.pam_service_name=PAM 서비스 명
 auths.enable_auto_register=자동 등록을 활성화
-auths.tips=도움말
 auths.edit=인증 설정 편집
 auths.activated=이 인증정보는 활성화되어있습니다.
 auths.new_success=새로운 인증 '%s'가 성공적으로 추가 되었습니다.
@@ -1285,7 +1288,6 @@ notices.delete_success=시스템 알림들이 성공적으로 삭제되었습니
 
 [action]
 create_repo=저장소를 만들었습니다. <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=<code>%[1]s에서</code>에서 <a href="%[2]s"> %[3]s</a>으로 저장소 이름을 바꾸었습니다.
 commit_repo=<a href="%[1]s">%[4]s</a>에서 <a href="%[1]s/src/%[2]s">%[3]s</a>으로 푸시함
 compare_commits=이 %d개의 커밋에 대한 비교 보기
@@ -1302,6 +1304,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=태그 <a href="%s/src/%s">%[2]s</a>를 <a href="%[1]s">%[3]s</a>로 푸시함
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=전

conf/locale/locale_lv-LV.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Jau ir konts? Pieraksties tagad!
 social_register_hepler_msg=Jau ir konts? Sasaisti tagad!
 disable_register_prompt=Atvainojiet, reģistrācija ir atspējota. Lūdzu, sazinieties ar vietnes administratoru.
 disable_register_mail=Atvainojiet, reģistrācijas e-pasta apstiprināšana ir atspējota.
+auth_source=Authentication Source
+local=Local
 remember_me=Atcerēties mani
 forgot_password=Aizmirsu paroli
 forget_password=Aizmirsi paroli?
@@ -229,6 +231,7 @@ org_name_been_taken=Organizācijas nosaukums ir jau aizņemts.
 team_name_been_taken=Komandas nosaukums ir jau aizņemts.
 email_been_used=E-pasta adrese jau tiek izmantota.
 username_password_incorrect=Lietotājvārds vai parole nav pareiza.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Lūdzu, pārliecinieties, vai ievadītā repozitorija nosaukums ir pareizs.
 enterred_invalid_owner_name=Lūdzu, pārliecinieties, vai ievadītā īpašnieka vārds ir pareizs.
 enterred_invalid_password=Lūdzu pārliecinieties, vai Jūsu ievadītā parole ir pareiza.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Vai ievadiet noslēpumu:
 two_factor_then_enter_passcode=Pēc tam ievadiet kodu:
 two_factor_verify=Pārbaudīt
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=Izmaiņu nosūtīšana
 settings.event_push_desc=Git izmaiņu nosūtīšana uz repozitoriju
 settings.event_issues=Problēmas
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Problēmas komentārs
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Izmaiņu pieprasījums
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Problēmas komentārs
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Laidiens
 settings.event_release_desc=Laidiens publicēts repozitorijā.
 settings.active=Aktīvs
@@ -1087,7 +1091,7 @@ repos.stars=Atzīmētās zvaigznītes
 repos.issues=Problēmas
 repos.size=Izmērs
 
-auths.auth_manage_panel=Autentifikācijas pārvaldības panelis
+auths.auth_sources=Authentication Sources
 auths.new=Pievienot jaunu avotu
 auths.name=Nosaukums
 auths.type=Veids
@@ -1128,7 +1132,6 @@ auths.enable_tls=Iespējot TLS šifrēšanu
 auths.skip_tls_verify=Izlaist TLS verifikāciju
 auths.pam_service_name=PAM servisa nosaukums
 auths.enable_auto_register=Iespējot automātisko reģistrāciju
-auths.tips=Padomi
 auths.edit=Labot autentifikācijas iestatījumus
 auths.activated=Autentifikācija ir aktivizēta
 auths.new_success=Jauna autentifikācija '%s' tika veiksmīgi pievienota.
@@ -1284,7 +1287,6 @@ notices.delete_success=Sistēmas paziņojumi tika veiksmīgi izdzēstas.
 
 [action]
 create_repo=izveidoja repozitoriju <a href="%s">%s</a>
-fork_repo=atdalīja repozitoriju uz <a href="%s">%s</a>
 rename_repo=pārsauca repozitoriju no <code>%[1]s</code> uz <a href="%[2]s">%[3]s</a>
 commit_repo=veica izmaiņu nosūtīšanu atzaram <a href="%[1]s/src/%[2]s">%[3]s</a> repozitorijā <a href="%[1]s">%[4]s</a>
 compare_commits=Salīdzināt šīs %d revīzijas
@@ -1301,6 +1303,10 @@ create_branch=izveidoja jaunu atzaru <a href="%[1]s/src/%[2]s">%[3]s</a> repozit
 delete_branch=izdzēsa atzaru <code>%[2]s</code> repozitorijā <a href="%[1]s">%[3]s</a>
 push_tag=pievienoja tagu <a href="%s/src/%s">%[2]s</a> repozitorijam <a href="%[1]s">%[3]s</a>
 delete_tag=izdzēsa tagu <code>%[2]s</code> repozitorijā <a href="%[1]s">%[3]s</a>
+fork_repo=atdalīja repozitoriju uz <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=atpakaļ

conf/locale/locale_nl-NL.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Heeft u al een account? Meld u nu aan!
 social_register_hepler_msg=Heeft u al een account? Koppel nu!
 disable_register_prompt=Sorry, registratie is uitgeschakeld. Neem contact op met de beheerder van deze site.
 disable_register_mail=Sorry, bevestiging van registratie per e-mail is uitgeschakeld.
+auth_source=Authentication Source
+local=Local
 remember_me=Onthoud mij
 forgot_password=Wachtwoord vergeten
 forget_password=Wachtwoord vergeten?
@@ -229,6 +231,7 @@ org_name_been_taken=Organisatie naam is al in gebruik.
 team_name_been_taken=Team naam is al in gebruik.
 email_been_used=e-mailadres is al in gebruik.
 username_password_incorrect=Gebruikersnaam of wachtwoord is niet correct.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=U heeft een onjuiste repositorie naam ingevoerd.
 enterred_invalid_owner_name=U heeft een onjuiste eigenaar ingevoerd.
 enterred_invalid_password=U heeft een onjuiste wachtwoord ingevoerd.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=Then enter passcode:
 two_factor_verify=Verifiëren
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push naar een repository
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Actief
@@ -1087,7 +1091,7 @@ repos.stars=Sterren
 repos.issues=Kwesties
 repos.size=Size
 
-auths.auth_manage_panel=Authenticatie-beheer paneel
+auths.auth_sources=Authentication Sources
 auths.new=Nieuwe bron toevoegen
 auths.name=Naam
 auths.type=Type
@@ -1128,7 +1132,6 @@ auths.enable_tls=Activeer TLS-encryptie
 auths.skip_tls_verify=TLS-verificatie overslaan
 auths.pam_service_name=PAM servicenaam
 auths.enable_auto_register=Activeer automatische registratie
-auths.tips=Tips
 auths.edit=Verificatie-instelling bewerken
 auths.activated=Deze autorisatiemethode is geactiveerd
 auths.new_success=Nieuwe authenticatie '%s' werd toegevoegd.
@@ -1284,7 +1287,6 @@ notices.delete_success=System notices have been deleted successfully.
 
 [action]
 create_repo=repositorie aangemaakt in <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=hernoemde repository van <code>%[1]s</code> naar <a href="%[2]s">%[3]s</a>
 commit_repo=push update naar <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%[1]s">%[4]s</a>
 compare_commits=Toon vergelijking voor deze %d commits
@@ -1301,6 +1303,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=geduwd label <a href="%s/src/%s"> %[2]s</a> naar <a href="%[1]s"> %[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=geleden

conf/locale/locale_pl-PL.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Masz już konto? Zaloguj się teraz!
 social_register_hepler_msg=Masz już konto? Powiąż je teraz!
 disable_register_prompt=Przepraszamy rejestracja została wyłączona. Prosimy o kontakt z administratorem serwisu.
 disable_register_mail=Przepraszamy, potwierdzenia rejestracji zostały wyłączone przez administratora.
+auth_source=Authentication Source
+local=Local
 remember_me=Zapamiętaj mnie
 forgot_password=Zapomniałem hasła
 forget_password=Zapomniałeś hasła?
@@ -229,6 +231,7 @@ org_name_been_taken=Nazwa organizacji jest już zajęta.
 team_name_been_taken=Nazwa zespołu jest już zajęta.
 email_been_used=Adres e-mail jest już zarejestrowany.
 username_password_incorrect=Nazwa użytkownika lub hasło nie jest prawidłowe.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Upewnij się, że wprowadzona nazwa repozytorium jest poprawna.
 enterred_invalid_owner_name=Upewnij się, że nazwa właściciela repozytorium jest poprawna.
 enterred_invalid_password=Proszę upewnij się, że wprowadzono hasło jest poprawne.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Lub wprowadź sekret:
 two_factor_then_enter_passcode=Następnie wprowadź kod dostępu:
 two_factor_verify=Weryfikuj
 two_factor_invalid_passcode=Wprowadzony kod nie jest prawidłowy, spróbuj ponownie!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Włączenie dwuetapowego uwierzytelniania nie powiodło się: %v
 two_factor_enable_success=Uwierzytelnianie dwuetapowe Twojego konta zostało włączone pomyślnie!
 two_factor_recovery_codes_title=Kody odzyskiwania uwierzytelniania dwuetapowego
@@ -819,10 +823,10 @@ settings.event_push=Wypchnięcie
 settings.event_push_desc=Wypchnięcie (push) do repozytorium Git
 settings.event_issues=Zagadnienia
 settings.event_issues_desc=Zagadnienie otwarte, zamknięte, ponownie otwarte, wyedytowane, przypisane, nieprzypisane, etykieta uaktualniona, etykieta wyczyszczona, kamień milowy, kamień milowy usunięty.
-settings.event_issue_comment=Komentarz zagadnienia
-settings.event_issue_comment_desc=Komentarz zagadnienia utworzony, wyedytowany lub usunięty.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request otwarty, zamknięty, ponownie otwarty, edytowany, przypisany, nieprzypisany, etykieta zaktualizowana, etykieta wyczyszczona, kamień milowy, kamień milowy wyczyszczony; lub zsynchronizowany.
+settings.event_issue_comment=Komentarz zagadnienia
+settings.event_issue_comment_desc=Komentarz zagadnienia utworzony, wyedytowany lub usunięty.
 settings.event_release=Wydanie
 settings.event_release_desc=Wydanie opublikowane w repozytorium.
 settings.active=Aktywny
@@ -1087,7 +1091,7 @@ repos.stars=Polubienia
 repos.issues=Problemy
 repos.size=Rozmiar
 
-auths.auth_manage_panel=Panel zarządzania uwierzytelnianiem
+auths.auth_sources=Authentication Sources
 auths.new=Dodaj nowe źródło
 auths.name=Nazwa
 auths.type=Typ
@@ -1128,7 +1132,6 @@ auths.enable_tls=Włącz szyfrowanie TLS
 auths.skip_tls_verify=Pomiń weryfikację protokołu TLS
 auths.pam_service_name=Nazwa usługi PAM
 auths.enable_auto_register=Włącz automatyczną rejestrację
-auths.tips=Wskazówki
 auths.edit=Edytuj ustawienia uwierzytelniania
 auths.activated=To uwierzytelnienie zostało aktywowane
 auths.new_success=Pomyślnie dodano nowe uwierzytelnianie '%s'.
@@ -1284,7 +1287,6 @@ notices.delete_success=Powiadomienia systemowe zostały pomyślnie usunięte.
 
 [action]
 create_repo=tworzy repozytorium <a href="%s">%s</a>
-fork_repo=rozwidlone repozytorium do <a href="%s"> %s</a>
 rename_repo=zmienia nazwę repozytorium <code>%[1]s</code> na <a href="%[2]s">%[3]s</a>
 commit_repo=wypycha do <a href="%[1]s/src/%[2]s">%[3]s</a> w <a href="%[1]s">%[4]s</a>
 compare_commits=Zobacz porównanie tych %d commitów
@@ -1301,6 +1303,10 @@ create_branch=stworzył nową gałąź <a href="%[1]s/src/%[2]s">%[3]s</a> at <a
 delete_branch=usunął gałąź <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=taguje <a href="%s/src/%s">%[2]s</a> w <a href="%[1]s">%[3]s</a>
 delete_tag=usunięty tag <code>%[2]s</code> % <a href="%[1]s">[3]s</a>
+fork_repo=rozwidlone repozytorium do <a href="%s"> %s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=temu

conf/locale/locale_pt-BR.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Já tem uma conta? Entre agora!
 social_register_hepler_msg=Já tem uma conta? Junte-se agora!
 disable_register_prompt=Desculpe, novos registros estão desabilitados. Por favor entre em contato com o administrador do site.
 disable_register_mail=Desculpe, a confirmação de registro por e-mail foi desabilitada.
+auth_source=Authentication Source
+local=Local
 remember_me=Lembrar de mim
 forgot_password=Esqueci a senha
 forget_password=Esqueceu a senha?
@@ -229,6 +231,7 @@ org_name_been_taken=Nome da organização já foi tomado.
 team_name_been_taken=Nome da equipe já existe.
 email_been_used=Endereço de e-mail já foi usado.
 username_password_incorrect=Usuário ou senha incorretos.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Por favor certifique-se que informou o nome do repositório corretamente.
 enterred_invalid_owner_name=Por favor, verifique se o nome do proprietário está correto.
 enterred_invalid_password=Por favor, verifique se a senha que você digitou está correta.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Ou informe o segredo:
 two_factor_then_enter_passcode=Em seguida digite a senha:
 two_factor_verify=Verificar
 two_factor_invalid_passcode=A senha inserida é inválida. Tente novamente!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Falha ao ativar a autenticação de dois fatores: %v
 two_factor_enable_success=A autenticação de dois fatores foi ativada para a sua conta com sucesso!
 two_factor_recovery_codes_title=Códigos de recup. p/ autenticação de dois fatores
@@ -740,7 +744,7 @@ settings.tracker_issue_style.alphanumeric=Alfanumérico
 settings.tracker_url_format_desc=Você pode usar o espaço reservado <code>{user} {repo} {index}</code> para o nome do usuário, índice de nome e a questão do repositório.
 settings.pulls_desc=Habilitar Pull Requests para aceitar contribuições públicas
 settings.pulls.ignore_whitespace=Ignorar alterações em espaço em branco
-settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
+settings.pulls.allow_rebase_merge=Permitir rebase para commits via merge
 settings.danger_zone=Zona de perigo
 settings.cannot_fork_to_same_owner=Não se pode realizar fork de um repositório para seu dono original.
 settings.new_owner_has_same_repo=O novo dono já tem um repositório com o mesmo nome. Por favor, escolha outro nome.
@@ -761,7 +765,7 @@ settings.wiki_deletion_success=Dados de wiki do repositório foram deletados com
 settings.delete=Deletar este repositório
 settings.delete_desc=Uma vez que você remova um repositório, não tem volta. Por favor, tenha certeza.
 settings.delete_notices_1=-Esta operação <strong>NÃO PODERÁ</strong> ser desfeita.
-settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
+settings.delete_notices_2=- Esta operação irá apagar permanentemente tudo neste repositório, incluindo commits, issues, comentários, o wiki e colaboradores.
 settings.delete_notices_fork_1=-Todos os forks se tornarão independentes após a exclusão.
 settings.deletion_success=Repositório excluído com sucesso!
 settings.update_settings_success=As opções do repositório foram atualizadas com sucesso.
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push para o repositório
 settings.event_issues=Problemas
 settings.event_issues_desc=Problema aberto, fechado, reaberto, editado, atribuído, desatribuído, etiqueta atualizada, etiqueta limpa, milestone definido ou milestone indefinido.
-settings.event_issue_comment=Comentário do Problema
-settings.event_issue_comment_desc=Comentário do problema criado, editado ou excluído.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request aberto, fechado, reaberto, editado, atribuído, desatribuído, etiqueta atualizada, etiqueta limpa, milestone definido, milestone indefinido ou sincronizado.
+settings.event_issue_comment=Comentário do Problema
+settings.event_issue_comment_desc=Comentário do problema criado, editado ou excluído.
 settings.event_release=Lançamento
 settings.event_release_desc=Lançamento publicado em um repositório.
 settings.active=Ativo
@@ -1087,7 +1091,7 @@ repos.stars=Favoritos
 repos.issues=Issues
 repos.size=Tamanho
 
-auths.auth_manage_panel=Painel de gerenciamento da autenticação
+auths.auth_sources=Authentication Sources
 auths.new=Adicionar nova fonte
 auths.name=Nome
 auths.type=Tipo
@@ -1100,7 +1104,7 @@ auths.domain=Domínio
 auths.host=Host
 auths.port=Porta
 auths.bind_dn=Vincular DN
-auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
+auths.bind_dn_helper=Você pode usar '%s' como placeholderpara o nome de usuário, por exemplo, DOM\%s
 auths.bind_password=Vincular senha
 auths.bind_password_helper=Atenção: Esta senha é armazenada em texto plano. Não use uma conta com muitos privilégios.
 auths.user_base=Base de pesquisa do usuário
@@ -1128,7 +1132,6 @@ auths.enable_tls=Habilitar Criptografia TLS
 auths.skip_tls_verify=Ignorar verificação de TLS
 auths.pam_service_name=Nome de Serviço PAM
 auths.enable_auto_register=Habilitar Registro Automático
-auths.tips=Dicas
 auths.edit=Editar a configuração de autenticação
 auths.activated=Esta autenticação foi ativada
 auths.new_success=Nova autenticação '%s' foi adicionada com sucesso.
@@ -1141,7 +1144,7 @@ auths.still_in_used=Esta autenticação ainda é usada por alguns usuários. Por
 auths.deletion_success=Autenticação excluída com sucesso!
 auths.login_source_exist=A fonte de login '%s" já existe.
 
-config.not_set=(not set)
+config.not_set=(não definido)
 config.server_config=Configuração do servidor
 config.app_name=Nome do aplicativo
 config.app_ver=Versão do aplicativo
@@ -1211,7 +1214,7 @@ config.skip_tls_verify=Pular verificação de TLS
 config.mailer_config=Configuração de envio de e-mail
 config.mailer_enabled=Habilitado
 config.mailer_disable_helo=Desabilitar HELO
-config.mailer_subject_prefix=Subject Prefix
+config.mailer_subject_prefix=Prefixo do Assunto
 config.mailer_host=Host
 config.mailer_user=Usuário
 config.send_test_mail=Enviar email de teste
@@ -1284,7 +1287,6 @@ notices.delete_success=Avisos do sistema foram excluídos com sucesso.
 
 [action]
 create_repo=repositório criado <a href="%s"> %s</a>
-fork_repo=repositório criado <a href="%s"> %s</a>
 rename_repo=renomeou o o repositório <code>%[1]s</code> para <a href="%[2]s">%[3]s</a>
 commit_repo=pushed para <a href="%[1]s/src/%[2]s">%[3]s</a> em <a href="%[1]s">%[4]s</a>
 compare_commits=Ver comparação entre esses %d commits
@@ -1300,7 +1302,11 @@ merge_pull_request=`mesclou o pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
 create_branch=criado novo branch <a href="%[1]s/src/%[2]s">%[3]s</a> em <a href="%[1]s">%[4]s</a>
 delete_branch=excluído branch <code>%[2]s</code> em <a href="%[1]s">%[3]s</a>
 push_tag=Foi feito push na tag <a href="%s/src/%s">%[2]s</a> para <a href="%[1]s">%[3]s</a>
-delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+delete_tag=excluída tag <code>%[2]s</code> em <a href="%[1]s">%[3]s</a>
+fork_repo=repositório criado <a href="%s"> %s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=atrás

conf/locale/locale_ru-RU.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Уже есть аккаунт? Авторизуйтесь!
 social_register_hepler_msg=Уже есть учетная запись? Свяжите ее с соцсетью!
 disable_register_prompt=Извините,  возможность регистрации отключена. Пожалуйста, свяжитесь с администратором сайта.
 disable_register_mail=К сожалению подтверждение регистрации по почте отключено.
+auth_source=Authentication Source
+local=Local
 remember_me=Запомнить меня
 forgot_password=Забыли пароль
 forget_password=Забыли пароль?
@@ -229,6 +231,7 @@ org_name_been_taken=Название организации занято.
 team_name_been_taken=Название команды занято.
 email_been_used=Адрес электронной почты уже используется.
 username_password_incorrect=Имя пользователя или пароль не правильный.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Пожалуйста, убедитесь, что введено правильное имя репозитория.
 enterred_invalid_owner_name=Убедитесь, что введенное имя владельца верное.
 enterred_invalid_password=Убедитесь, что введенный пароль верен.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Или введите кодовое слово:
 two_factor_then_enter_passcode=Затем введите пароль:
 two_factor_verify=Проверить
 two_factor_invalid_passcode=Введенные пароли не совпадают; пожалуйста, повторите попытку!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Ошибка активация двухфакторной аутентификации: %v
 two_factor_enable_success=Двухфакторная аутентификация активирована для вашей учетной записи!
 two_factor_recovery_codes_title=Коды восстановления для двухфакторная аутентификации
@@ -761,7 +765,7 @@ settings.wiki_deletion_success=Данные Вики успешно стерты
 settings.delete=Удалить этот репозиторий
 settings.delete_desc=Будьте внимательны! Как только вы удалите репозиторий — пути назад не будет.
 settings.delete_notices_1=- Эта операция <strong>НЕ МОЖЕТ</strong> быть отменена.
-settings.delete_notices_2=-Эта операция удалит все в этом репозитории, включая Git данные, вопросы, комментарии и соавтор доступа.
+settings.delete_notices_2=- Эта операция удалит все в этом репозитории, включая данные Git, задачи, комментарии и доступы для соавторов.
 settings.delete_notices_fork_1=- Все отвлетвления станут независимыми после удаления.
 settings.deletion_success=Репозиторий был успешно удалён!
 settings.update_settings_success=Настройки репозитория обновлены успешно.
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Push в репозиторий
 settings.event_issues=Вопросы
 settings.event_issues_desc=Задача изменена
-settings.event_issue_comment=Комментарии в задаче
-settings.event_issue_comment_desc=Комментарий создан, изменен или удален.
 settings.event_pull_request=Запросы на слияние
 settings.event_pull_request_desc=Запрос слияния открыт, закрыт, переоткрыт, изменён, назначен, снят, метка обновлена, метка убрана, добавлен промежуточный этап, убран промежуточный этап или синхронизирован.
+settings.event_issue_comment=Комментарии в задаче
+settings.event_issue_comment_desc=Комментарий создан, изменен или удален.
 settings.event_release=Релиз
 settings.event_release_desc=Релиз опубликован в репозитории.
 settings.active=Активен
@@ -1087,7 +1091,7 @@ repos.stars=В избранном
 repos.issues=Задачи
 repos.size=Размер
 
-auths.auth_manage_panel=Панель управления аутнентификациями
+auths.auth_sources=Authentication Sources
 auths.new=Добавить новый источник
 auths.name=Имя
 auths.type=Тип
@@ -1128,7 +1132,6 @@ auths.enable_tls=Включение шифрования TLS
 auths.skip_tls_verify=Пропустить проверку TLS
 auths.pam_service_name=Имя службы PAM
 auths.enable_auto_register=Включить автоматическую регистрацию
-auths.tips=Советы
 auths.edit=Изменить параметры канала аутентификации
 auths.activated=Эта аутентификация активирована
 auths.new_success=Новый канал аутентификации '%s' успешно создан.
@@ -1163,7 +1166,7 @@ config.ssh_domain=Домен
 config.ssh_port=Порт
 config.ssh_listen_port=Прослушиваемый порт
 config.ssh_root_path=Корневой путь
-config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
+config.ssh_rewrite_authorized_keys_at_start=Перезаписать authorized_keys при запуске
 config.ssh_key_test_path=Путь к тестовому ключу
 config.ssh_keygen_path=Путь к генератору ключей ('ssh-keygen')
 config.ssh_minimum_key_size_check=Минимальный размер ключа проверки
@@ -1211,7 +1214,7 @@ config.skip_tls_verify=Пропустить проверку TLS
 config.mailer_config=Настройки почты
 config.mailer_enabled=Включено
 config.mailer_disable_helo=Отключить HELO
-config.mailer_subject_prefix=Префикс темы
+config.mailer_subject_prefix=Префикс темы письма
 config.mailer_host=Сервер
 config.mailer_user=Пользователь
 config.send_test_mail=Отправить тестовое письмо
@@ -1284,7 +1287,6 @@ notices.delete_success=Системное уведомление успешно
 
 [action]
 create_repo=создал(а) репозиторий <a href="%s"> %s</a>
-fork_repo=склонировать репозиторий в <a href="%s">%s</a>
 rename_repo=переименовал(а) репозиторий из <code>%[1]s</code> на <a href="%[2]s">%[3]s</a>
 commit_repo=запушил(а) <a href="%[1]s/src/%[2]s">%[3]s</a> в <a href="%[1]s">%[4]s</a>
 compare_commits=Просмотр сравнение для этих %d коммитов
@@ -1301,6 +1303,10 @@ create_branch=создал новую ветку <a href="%[1]s/src/%[2]s">%[3]s
 delete_branch=удалил ветку <code>%[2]s</code> в <a href="%[1]s">%[3]s</a>
 push_tag=запушил(а) метку <a href="%s/src/%s">%[2]s</a> в <a href="%[1]s">%[3]s</a>
 delete_tag=удален тег <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=склонировать репозиторий в <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=назад

conf/locale/locale_sk-SK.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Máte už účet? Prihláste sa teraz!
 social_register_hepler_msg=Máte už účet? Bindovať teraz!
 disable_register_prompt=Ospravedlňujeme sa, ale registrácia bola vypnutá. Obráťte sa na administrátora stránky.
 disable_register_mail=Ospravedlňujeme sa, potvrdenie registračného e-mailu bolo vypnuté.
+auth_source=Authentication Source
+local=Local
 remember_me=Zapamätať prihlásenie
 forgot_password=Zabudnuté heslo
 forget_password=Zabudli ste heslo?
@@ -229,6 +231,7 @@ org_name_been_taken=Názov organizácie už bol použitý.
 team_name_been_taken=Názov tímu už bol použitý.
 email_been_used=E-mailová adresa už bola použitá.
 username_password_incorrect=Používateľské meno alebo heslo nie je správne.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Uistite sa prosím, že názov repozitára, ktorý ste zadali je správny.
 enterred_invalid_owner_name=Uistite sa prosím, že meno vlastníka, ktoré ste zadali je správne.
 enterred_invalid_password=Uistite sa prosím, že heslo ktoré ste zadali je správne.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Alebo zadajte tajný kód:
 two_factor_then_enter_passcode=Potom zadajte prístupový kód:
 two_factor_verify=Overiť
 two_factor_invalid_passcode=Zadaný prístupový kód nie je platný, prosím, skúste to znova!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Povolenie dvojfaktorového overenia zlyhalo: %v
 two_factor_enable_success=Dvojfaktorové overenie bolo pre Váš účet povolené!
 two_factor_recovery_codes_title=Obnovovacie kódy dvojfaktorového overenia
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push do repozitára
 settings.event_issues=Úlohy
 settings.event_issues_desc=Úloha, ktorá je otvorená, uzavretá, znovuotvorená, zmenená, priradená, nepriradená, má zmenený štítok, odstránený štítok, má priradený milník, nemajúca priradený milník.
-settings.event_issue_comment=Komentár k úlohe
-settings.event_issue_comment_desc=Komentár k úlohe vytvorený, upravený alebo odstránený.
 settings.event_pull_request=Pull request
 settings.event_pull_request_desc=Požiadavka na stiahnutie otvorená, uzavrená, znovuotvorená, zmenená, priradená, nepriradená, zmenený štítok, odstránený štítok, má nastavený štítok, zrušenie nastaveného štítku alebo synchronizovaná.
+settings.event_issue_comment=Komentár k úlohe
+settings.event_issue_comment_desc=Komentár k úlohe vytvorený, upravený alebo odstránený.
 settings.event_release=Vydanie
 settings.event_release_desc=Vydanie vystavené v repozitári.
 settings.active=Aktívny
@@ -1087,7 +1091,7 @@ repos.stars=Hviezdy
 repos.issues=Issues
 repos.size=Veľkosť
 
-auths.auth_manage_panel=Panel správy spôsobu overovania
+auths.auth_sources=Authentication Sources
 auths.new=Pridať nový zdroj
 auths.name=Názov
 auths.type=Typ
@@ -1128,7 +1132,6 @@ auths.enable_tls=Povoliť šifrovanie TLS
 auths.skip_tls_verify=Preskočiť overenie TLS
 auths.pam_service_name=Názov služby PAM
 auths.enable_auto_register=Povoliť auto registráciu
-auths.tips=Tipy
 auths.edit=Upraviť nastavenie overovania
 auths.activated=Tento spôsob overovania je aktívny
 auths.new_success=Nový spôsob overovania '%s' bol pridaný.
@@ -1284,7 +1287,6 @@ notices.delete_success=Systémové upozornenia boli odstránené.
 
 [action]
 create_repo=vytvoril repozitár <a href="%s">%s</a>
-fork_repo=rozštiepil repozitár do <a href="%s">%s</a>
 rename_repo=premenoval repozitár z <code>%[1]s</code> na <a href="%[2]s">%[3]s</a>
 commit_repo=odoslal do vetvy <a href="%[1]s/src/%[2]s">%[3]s</a> v repositáři <a href="%[1]s">%[4]s</a>
 compare_commits=Zobraziť porovnanie týchto %d commitov
@@ -1301,6 +1303,10 @@ create_branch=vytvoril novú vetvu <a href="%[1]s/src/%[2]s">%[3]s</a> v <a href
 delete_branch=odstránil vetvu <code>%[2]s</code> v <a href="%[1]s">%[3]s</a>
 push_tag=odoslal značku <a href="%s/src/%s">%[2]s</a> do repozitára <a href="%[1]s">%[3]s</a>
 delete_tag=odstránená značka <code>%[2]s</code> v <a href="%[1]s">%[3]s</a>
+fork_repo=rozštiepil repozitár do <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=pred

conf/locale/locale_sr-SP.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Већ имате налог? Пријавите се!
 social_register_hepler_msg=Већ имате налог? Повежите се преко социалне мреже!
 disable_register_prompt=Извините регистрација је онемогућено. Молимо вас, контактирајте администратора.
 disable_register_mail=Извините, потврда путем поште је онемогућено.
+auth_source=Authentication Source
+local=Local
 remember_me=Запамти ме
 forgot_password=Заборављена лозинка
 forget_password=Заборавили сте лозинку?
@@ -229,6 +231,7 @@ org_name_been_taken=Име организације је већ заузето.
 team_name_been_taken=Име екипе је већ заузето.
 email_been_used=Адреса е-поште се већ користи.
 username_password_incorrect=Корисничко име или лозинка није исправна.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Молимо вас, проверите да је име спремишта тачно унешено.
 enterred_invalid_owner_name=Молимо вас проверите да сте добро унели име власника.
 enterred_invalid_password=Молимо вас проверите да сте добро унели лозинку.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Или унесите тајну шифру:
 two_factor_then_enter_passcode=Па унесите шифру:
 two_factor_verify=Проверити
 two_factor_invalid_passcode=Шифрa коју сте унели није важећа, молим бас пробајте поново!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Активација двоструке аутентификације није успела: %v
 two_factor_enable_success=Двострука аутентификација је успешно активирана за ваш налог!
 two_factor_recovery_codes_title=Шифра за опоравак за двоструку аутентификацију
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push у спремиште
 settings.event_issues=Задаци
 settings.event_issues_desc=Проблем је отворен, затворен, поново отворен, уређен, додељен, не додељен, етикета је ажурирана, етикета је очишћена, помјерена или демилестирана.
-settings.event_issue_comment=Коментар проблема
-settings.event_issue_comment_desc=Коментар проблема креиран, уређиван или избришен.
 settings.event_pull_request=Захтев за спајање
 settings.event_pull_request_desc=Захтев за спајање отворенo, затворено, додељено, недодељенo, ознака ажурирана, ознака избрисана, створена прекретница, избрисана прекретница, или синхронизовано.
+settings.event_issue_comment=Коментар проблема
+settings.event_issue_comment_desc=Коментар проблема креиран, уређиван или избришен.
 settings.event_release=Издање
 settings.event_release_desc=Издање објављено на спремишту.
 settings.active=Активно
@@ -1087,7 +1091,7 @@ repos.stars=Фаворити
 repos.issues=Задаци
 repos.size=Величина
 
-auths.auth_manage_panel=Контролна панела аутентикације
+auths.auth_sources=Authentication Sources
 auths.new=Додај нови извор
 auths.name=Име
 auths.type=Тип
@@ -1128,7 +1132,6 @@ auths.enable_tls=Омогући TLS шифровање
 auths.skip_tls_verify=Прескочи TLS проверу
 auths.pam_service_name=Назив PAM сервиса
 auths.enable_auto_register=Омогући аутоматску регистрацију
-auths.tips=Савети
 auths.edit=Промените подешавања канала аутентикације
 auths.activated=Овај канал аутентикације је активан
 auths.new_success=Нови канал аутентикације '%s' је успешно креиран.
@@ -1284,7 +1287,6 @@ notices.delete_success=Системска обавештавања су успе
 
 [action]
 create_repo=креира спремиште <a href="%s">%s</a>
-fork_repo=отворио спремиште <a href="%s">%s</a>
 rename_repo=преимензје спремиште од <code>%[1]s</code> на <a href="%[2]s">%[3]s</a>
 commit_repo=извршује push на <a href="%[1]s/src/%[2]s">%[3]s</a> у <a href="%[1]s">%[4]s</a>
 compare_commits=Поређење ових %d комита
@@ -1301,6 +1303,10 @@ create_branch=створи нову филијалy <a href="%[1]s/src/%[2]s">%[
 delete_branch=избрисана филијалa <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=извршује push са ознаком <a href="%s/src/%s">%[2]s</a> на <a href="%[1]s">%[3]s</a>
 delete_tag=избрисана ознака <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=отворио спремиште <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=пре

conf/locale/locale_sv-SE.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Har du redan ett konto? Logga in nu!
 social_register_hepler_msg=Har du redan ett konto? Anslut det nu!
 disable_register_prompt=Tyvärr är användarregistreringen inaktiverad. Vänligen kontakta din administratör.
 disable_register_mail=Tyvärr så är registreringsbekräftelemailutskick inaktiverat.
+auth_source=Authentication Source
+local=Local
 remember_me=Kom ihåg mig
 forgot_password=Glömt lösenord
 forget_password=Glömt lösenordet?
@@ -229,6 +231,7 @@ org_name_been_taken=Organisationsnamnet har redan används.
 team_name_been_taken=Team namn är redan använt.
 email_been_used=E-postadressen har redan använts.
 username_password_incorrect=Användarnamnet eller lösenordet är inte korrekt.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Se till att utvecklingskatalogen som du angav är rätt.
 enterred_invalid_owner_name=Kontrollera att ägarnamnet som du angav är rätt.
 enterred_invalid_password=Se till att den som lösenord du angett är rätt.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=Ange sedan lösenordet:
 two_factor_verify=Verifiera
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=Pusha
 settings.event_push_desc=Uppladdning till ett förråd
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Hämtningsbegäran
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Aktiv
@@ -1087,7 +1091,7 @@ repos.stars=Stjärnor
 repos.issues=Ärenden
 repos.size=Size
 
-auths.auth_manage_panel=Panel för hantering av autentisering
+auths.auth_sources=Authentication Sources
 auths.new=Lägg till ny källa
 auths.name=Namn
 auths.type=Typ
@@ -1128,7 +1132,6 @@ auths.enable_tls=Aktivera TLS-kryptering
 auths.skip_tls_verify=Skip TLS Verify
 auths.pam_service_name=PAM Service Name
 auths.enable_auto_register=Enable Auto Registration
-auths.tips=Tips
 auths.edit=Edit Authentication Setting
 auths.activated=This authentication is activated
 auths.new_success=New authentication '%s' has been added successfully.
@@ -1284,7 +1287,6 @@ notices.delete_success=System notices have been deleted successfully.
 
 [action]
 create_repo=skapade utvecklingskatalog <a href="%s"> %s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=renamed repository from <code>%[1]s</code> to <a href="%[2]s">%[3]s</a>
 commit_repo=pushed to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
 compare_commits=View comparison for these %d commits
@@ -1301,6 +1303,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=pushed tag <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=sedan

conf/locale/locale_tr-TR.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Bir hesabınız var mı? Şimdi giriş yapın!
 social_register_hepler_msg=Zaten bir hesabınız var mı? Şimdi bağlanın!
 disable_register_prompt=Üzgünüz, kaydolma devre dışı bırakıldı. Lütfen site yöneticisiyle irtibata geçin.
 disable_register_mail=Üzgünüz, kayıt doğrulama e-postası devre dışı bırakıldı.
+auth_source=Authentication Source
+local=Local
 remember_me=Beni Hatırla
 forgot_password=Parolamı Unuttum
 forget_password=Parolanızı mı unuttunuz?
@@ -229,6 +231,7 @@ org_name_been_taken=Bu organizasyon adı zaten alınmış.
 team_name_been_taken=Bu takım adı zaten alınmış.
 email_been_used=Bu e-posta adresi zaten kullanımda.
 username_password_incorrect=Kullanıcı adı veya parola hatalı.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Lütfen girdiğiniz depo isminin doğru olduğundan emin olun.
 enterred_invalid_owner_name=Lütfen girdiğiniz depo sahibi isminin doğru olduğundan emin olun.
 enterred_invalid_password=Lütfen girdiğiniz parolanın doğru olduğundan emin olun.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Veya parola girin:
 two_factor_then_enter_passcode=Daha sonra şifre kodunu girin:
 two_factor_verify=Doğrula
 two_factor_invalid_passcode=Girdiğiniz şifre kodu geçersiz,lütfen tekrar deneyin!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=İki faktörlü kimlik doğrulama etkinleştirmesi başarısız :%v
 two_factor_enable_success=Hesabınız için iki faktörlü kimlik doğrulama başarıyla devre dışı bırakıldı!
 two_factor_recovery_codes_title=İki faktörlü Kimlik doğrulama Kurtarma Kodları
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Bir depoya git push
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Aktif
@@ -1087,7 +1091,7 @@ repos.stars=Yıldızlar
 repos.issues=Sorunlar
 repos.size=Size
 
-auths.auth_manage_panel=Yetkilendirme Yönetim Paneli
+auths.auth_sources=Authentication Sources
 auths.new=Yeni Kaynak Ekle
 auths.name=İsim
 auths.type=Tür
@@ -1128,7 +1132,6 @@ auths.enable_tls=TLS Şifrelemeyi Aktifleştir
 auths.skip_tls_verify=TLS Doğrulamasını Atla
 auths.pam_service_name=PAM Servis Adı
 auths.enable_auto_register=Otomatik Kaydolmayı Aktifleştir
-auths.tips=İpuçları
 auths.edit=Yetkilendirme Ayarlarını Düzenle
 auths.activated=Bu yetkilendirme aktif
 auths.new_success=Yeni yetkilendirme '%s' başarıyla eklendi.
@@ -1284,7 +1287,6 @@ notices.delete_success=Sistem bildirimleri başarıyla silindi.
 
 [action]
 create_repo=depo <a href="%s">%s</a> oluşturuldu
-fork_repo=<a href="%s">%s</a> için bir depo çatalladı
 rename_repo=<code>%[1]s</code> olan depo adını <a href="%[2]s">%[3]s</a> buna çevirdi
 commit_repo=<a href="%[1]s">%[4]s</a> zamanında <a href="%[1]s/src/%[2]s">%[3]s</a> buraya push yaptı
 compare_commits=Bu %d işlemeler için karşılaştırmaları görüntüle
@@ -1301,6 +1303,10 @@ create_branch=<a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> y
 delete_branch=<code>%[2]s</code> 'ın <a href="%[1]s">%[3]s</a> şubesi silindi
 push_tag=etiket <a href="%s/src/%s">%[2]s</a> <a href="%[1]s">%[3]s</a>'a itelendi
 delete_tag=<code>%[2]s</code> 'ın <a href="%[1]s">%[3]s</a> etiketi silindi
+fork_repo=<a href="%s">%s</a> için bir depo çatalladı
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=önce

conf/locale/locale_uk-UA.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Вже зареєстровані? Увійдіть зара
 social_register_hepler_msg=Вже зареєстровані? Прив'яжіть зараз!
 disable_register_prompt=Вибачте, реєстрація відключена. Будь ласка, зв'яжіться з адміністратором сайту.
 disable_register_mail=На жаль, підтвердження реєстрації на електрону пошту було відключено.
+auth_source=Authentication Source
+local=Local
 remember_me=Запам'ятати мене
 forgot_password=Забув пароль
 forget_password=Забули пароль?
@@ -229,6 +231,7 @@ org_name_been_taken=Назва організаціі вже використо
 team_name_been_taken=Назва команди вже використовується.
 email_been_used=Адреса електронної пошти вже використовується.
 username_password_incorrect=Ім'я користувача або пароль помилкові.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Переконайтеся, що ви ввели назву сховища правильно.
 enterred_invalid_owner_name=Переконайтеся, що ви ввели ім'я власника правильно.
 enterred_invalid_password=Переконайтеся, що ви ввели пароль правильно.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Або введіть секрет:
 two_factor_then_enter_passcode=Потім введіть пароль:
 two_factor_verify=Перевірити
 two_factor_invalid_passcode=Введений пароль не валідний, будь ласка, спробуйте ще раз!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Увімкнення двофакторної автентифікації не вдалося: %v
 two_factor_enable_success=Двофакторну автентифікацію успішно активовано для вашого акаунту!
 two_factor_recovery_codes_title=Пароль відновлення для двофакторної автентифікації
@@ -819,10 +823,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push до репозиторію
 settings.event_issues=Проблеми
 settings.event_issues_desc=Проблему відкрито, закрито, перевідкрито, відредаговано, призначено, відкріплено, змінено мітку, очищено мітку, створено етап, очищено етап.
-settings.event_issue_comment=Коментар проблеми
-settings.event_issue_comment_desc=Коментар проблеми створено, видалено чи відредаговано.
 settings.event_pull_request=Запити до злиття
 settings.event_pull_request_desc=Запрос на злиття відкрито, закрито, перевідкрито, прикріплено, відкріплено, оновлено мітку, очищено мітку, створено етап, очищено етап або синхронізовано.
+settings.event_issue_comment=Коментар проблеми
+settings.event_issue_comment_desc=Коментар проблеми створено, видалено чи відредаговано.
 settings.event_release=Реліз
 settings.event_release_desc=Реліз опубліковано у репозиторії.
 settings.active=Активний
@@ -1087,7 +1091,7 @@ repos.stars=У обраному
 repos.issues=Питання
 repos.size=Розмір
 
-auths.auth_manage_panel=Керування автентифікацій
+auths.auth_sources=Authentication Sources
 auths.new=Додати нове джерело
 auths.name=Назва
 auths.type=Тип
@@ -1128,7 +1132,6 @@ auths.enable_tls=Увімкнути TLS-шифрування
 auths.skip_tls_verify=Пропустити перевірку TLS
 auths.pam_service_name=Ім'я служби PAM
 auths.enable_auto_register=Увімкнути автоматичну реєстрацію
-auths.tips=Поради
 auths.edit=Редагувати налаштування автентифікації
 auths.activated=Цю автентифікацію активовано
 auths.new_success=Нову автентифікацію '%s' було успішно додано.
@@ -1284,7 +1287,6 @@ notices.delete_success=Системні повідомлення було усп
 
 [action]
 create_repo=створено репозиторій <a href="%s">%s</a>
-fork_repo=відгалуджено репозиторій у <a href="%s">%s</a>
 rename_repo=репозиторій перейменовано з <code>%[1]s</code> на <a href="%[2]s">%[3]s</a>
 commit_repo=запушено до <a href="%[1]s/src/%[2]s">%[3]s</a> у <a href="%[1]s">%[4]s</a>
 compare_commits=Перегляд порівняння для цих %d комітів
@@ -1301,6 +1303,10 @@ create_branch=створено нову гілку <a href="%[1]s/src/%[2]s">%[3
 delete_branch=видалено гілку <code>%[2]s</code> у <a href="%[1]s">%[3]s</a>
 push_tag=заштовхнуто тег <a href="%s/src/%s">%[2]s</a> до <a href="%[1]s">%[3]s</a>
 delete_tag=видалено мітку <code>%[2]s</code> у <a href="%[1]s">%[3]s</a>
+fork_repo=відгалуджено репозиторій у <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=тому

conf/locale/locale_vi-VN.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Đã có tài khoản? Đăng nhập bây giờ!
 social_register_hepler_msg=Đã có tài khoản? Đăng nhập bây giờ!
 disable_register_prompt=Xin lỗi, đăng ký đã bị vô hiệu. Xin vui lòng liên hệ với người quản trị trang web.
 disable_register_mail=Xin lỗi, đăng ký đã bị vô hiệu. Xin vui lòng liên hệ với người quản trị trang web.
+auth_source=Authentication Source
+local=Local
 remember_me=Ghi nhớ tôi
 forgot_password=Quên mật khẩu
 forget_password=Quên mật khẩu?
@@ -229,6 +231,7 @@ org_name_been_taken=Tên tổ chức đã được sử dụng.
 team_name_been_taken=Tên nhóm đã được sử dụng.
 email_been_used=Email đã được sử dụng.
 username_password_incorrect=Tên đăng nhập hoặc mật khẩu không đúng.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Hãy chắc chắn tên kho đã nhập chính xác.
 enterred_invalid_owner_name=Please make sure that the owner name you entered is correct.
 enterred_invalid_password=Please make sure the that password you entered is correct.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Hoặc nhập mã bí mật:
 two_factor_then_enter_passcode=Sau đó nhập mã:
 two_factor_verify=Xác minh
 two_factor_invalid_passcode=Mật mã mà bạn đã nhập không hợp lệ, hãy thử lại!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Kích hoạt xác thực 2 yếu tố không thành công: %v
 two_factor_enable_success=Xác thực 2 yếu tố đã kích hoạt cho tài khoản của bạn thành công!
 two_factor_recovery_codes_title=Mã khôi phục xác thực 2 yếu tố
@@ -819,10 +823,10 @@ settings.event_push=Đẩy
 settings.event_push_desc=Git push đến một kho
 settings.event_issues=Các vấn đề
 settings.event_issues_desc=Vấn đề mở, đóng cửa, mở cửa trở lại, chỉnh sửa, phân công, unassigned, nhãn Cập Nhật, nhãn xóa, milestoned hoặc demilestoned.
-settings.event_issue_comment=Bình luận của vấn đề
-settings.event_issue_comment_desc=Vấn đề bình luận đã tạo, chỉnh sửa hoặc xóa.
 settings.event_pull_request=Yêu cầu khéo về
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Bình luận của vấn đề
+settings.event_issue_comment_desc=Vấn đề bình luận đã tạo, chỉnh sửa hoặc xóa.
 settings.event_release=Phát hành
 settings.event_release_desc=Bản phân phối đã được công khai ở một kho.
 settings.active=Kích hoạt
@@ -1087,7 +1091,7 @@ repos.stars=Sao
 repos.issues=Các vấn đề
 repos.size=Kích cỡ
 
-auths.auth_manage_panel=Bảng quản lý xác thực
+auths.auth_sources=Authentication Sources
 auths.new=Thêm mới source
 auths.name=Tên
 auths.type=Loại
@@ -1128,7 +1132,6 @@ auths.enable_tls=Kích hoạt TLS Encryption
 auths.skip_tls_verify=Bỏ qua xác thực TLS
 auths.pam_service_name=Tên dịch vụ PAM
 auths.enable_auto_register=Cho phép tự động đăng ký
-auths.tips=Mẹo
 auths.edit=Chỉnh sửa cài đặt xác thực
 auths.activated=Xác thực này đã được kích hoạt
 auths.new_success=Xác thực mới '%s' đã được thêm vào thành công.
@@ -1284,7 +1287,6 @@ notices.delete_success=Thông báo hệ thống đã xóa thành công.
 
 [action]
 create_repo=đã tạo kho lưu trữ <a href="%s">%s</a>
-fork_repo=đã fork một kho lưu trữ đến <a href="%s">%s</a>
 rename_repo=đã đổi tên kho <code>%[1]s</code> thành <a href="%[2]s">%[3]s</a>
 commit_repo=đã đẩy đến <a href="%[1]s/src/%[2]s">%[3]s</a> tại <a href="%[1]s">%[4]s</a>
 compare_commits=Xem so sánh cho các commit %d
@@ -1301,6 +1303,10 @@ create_branch=tạo nhánh mới <a href="%[1]s/src/%[2]s">%[3]s</a> tại <a hr
 delete_branch=xóa chi nhánh <code>%[2]s</code> tại <a href="%[1]s">%[3]s</a>
 push_tag=đã đẩy thẻ tag <a href="%s/src/%s">%[2]s</a> đến <a href="%[1]s">%[3]s</a>
 delete_tag=đã xóa thẻ tag <code>%[2]s</code> tại <a href="%[1]s">%[3]s</a>
+fork_repo=đã fork một kho lưu trữ đến <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=cách đây

conf/locale/locale_zh-CN.ini

@@ -151,6 +151,8 @@ register_hepler_msg=已经注册？立即登录！
 social_register_hepler_msg=已经注册？立即绑定！
 disable_register_prompt=对不起，注册功能已被关闭。请联系网站管理员。
 disable_register_mail=对不起，注册邮箱确认功能已被关闭。
+auth_source=认证源
+local=本地
 remember_me=记住登录
 forgot_password=忘记密码
 forget_password=忘记密码？
@@ -229,6 +231,7 @@ org_name_been_taken=组织名称已经被占用。
 team_name_been_taken=团队名称已经被占用。
 email_been_used=邮箱地址已经被使用。
 username_password_incorrect=用户名或密码不正确。
+auth_source_mismatch=该用户未与所选择的认证源进行关联
 enterred_invalid_repo_name=请检查您输入的仓库名称是正确。
 enterred_invalid_owner_name=请检查您输入的新所有者用户名是否正确。
 enterred_invalid_password=请检查您输入的密码是否正确。
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=或者直接输入密钥：
 two_factor_then_enter_passcode=然后输入动态令牌：
 two_factor_verify=验证令牌
 two_factor_invalid_passcode=您输入的动态令牌无效，请重试！
+two_factor_reused_passcode=您输入的令牌已经被使用，请等待数秒后尝试新的令牌！
 two_factor_enable_error=启用两步验证失败：%v
 two_factor_enable_success=两步验证登录启用成功！
 two_factor_recovery_codes_title=两步验证恢复密钥
@@ -819,10 +823,10 @@ settings.event_push=推送
 settings.event_push_desc=Git 仓库推送
 settings.event_issues=工单
 settings.event_issues_desc=工单被开启、关闭、重新开启、编辑、指派、取消指派、更新标签、清除标签、设置里程碑或取消设置里程碑
-settings.event_issue_comment=工单评论
-settings.event_issue_comment_desc=工单评论被创建、编辑和删除
 settings.event_pull_request=合并请求
 settings.event_pull_request_desc=合并请求被开启、关闭、重新开启、编辑、指派、取消指派、更新标签、清除标签、设置里程碑、取消设置里程碑或代码同步
+settings.event_issue_comment=工单评论
+settings.event_issue_comment_desc=工单评论被创建、编辑和删除
 settings.event_release=版本发布
 settings.event_release_desc=仓库发布新的版本
 settings.active=是否激活
@@ -1087,7 +1091,7 @@ repos.stars=点赞数
 repos.issues=工单数
 repos.size=用量
 
-auths.auth_manage_panel=认证管理面板
+auths.auth_sources=认证源
 auths.new=添加新的源
 auths.name=认证名称
 auths.type=认证类型
@@ -1128,7 +1132,6 @@ auths.enable_tls=启用 TLS 加密
 auths.skip_tls_verify=忽略 TLS 验证
 auths.pam_service_name=PAM 服务名称
 auths.enable_auto_register=允许授权用户自动注册
-auths.tips=帮助提示
 auths.edit=编辑认证设置
 auths.activated=该授权认证已经启用
 auths.new_success=新的授权源 "%s" 添加成功！
@@ -1284,7 +1287,6 @@ notices.delete_success=系统提示删除成功！
 
 [action]
 create_repo=创建了仓库 <a href="%s">%s</a>
-fork_repo=派生了仓库 <a href="%s">%s</a>
 rename_repo=重命名仓库 <code>%[1]s</code> 为 <a href="%[2]s">%[3]s</a>
 commit_repo=推送了 <a href="%[1]s/src/%[2]s">%[3]s</a> 分支的代码到 <a href="%[1]s">%[4]s</a>
 compare_commits=对比 %d 次代码提交
@@ -1301,6 +1303,10 @@ create_branch=创建了新的分支 <a href="%[1]s/src/%[2]s">%[3]s</a> 到 <a h
 delete_branch=删除了 <a href="%[1]s">%[3]s</a> 的分支 <code>%[2]s</code>
 push_tag=推送了标签 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
 delete_tag=删除了 <a href="%[1]s">%[3]s</a> 的标签 <code>%[2]s</code>
+fork_repo=派生了仓库 <a href="%s">%s</a>
+mirror_sync_push=从镜像同步了 <a href="%[1]s/src/%[2]s">%[3]s</a> 分支的代码到 <a href="%[1]s">%[4]s</a>
+mirror_sync_create=从镜像同步了新的引用 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
+mirror_sync_delete=从镜像同步并从 <a href="%[1]s">%[3]s</a>  删除了引用 <code>%[2]s</code>
 
 [tool]
 ago=之前

conf/locale/locale_zh-HK.ini

@@ -151,6 +151,8 @@ register_hepler_msg=已經註冊？立即登錄！
 social_register_hepler_msg=已經註冊？立即綁定！
 disable_register_prompt=對不起，註冊功能已被關閉。請聯系網站管理員。
 disable_register_mail=對不起，註冊郵箱確認功能已被關閉。
+auth_source=Authentication Source
+local=Local
 remember_me=記住登錄
 forgot_password=忘記密碼
 forget_password=忘記密碼？
@@ -229,6 +231,7 @@ org_name_been_taken=組織名稱已經被佔用。
 team_name_been_taken=團隊名稱已經被佔用。
 email_been_used=郵箱地址已經被使用。
 username_password_incorrect=用戶名或密碼不正確。
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=請檢查您輸入的倉庫名稱是正確。
 enterred_invalid_owner_name=請檢查您輸入的新所有者用戶名是否正確。
 enterred_invalid_password=請檢查您輸入的密碼是否正確。
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=或者輸入密碼：
 two_factor_then_enter_passcode=然後輸入驗證碼：
 two_factor_verify=驗證
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -819,10 +823,10 @@ settings.event_push=推送
 settings.event_push_desc=Git 倉庫推送
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=是否激活
@@ -1087,7 +1091,7 @@ repos.stars=讚好數
 repos.issues=問題數
 repos.size=Size
 
-auths.auth_manage_panel=認證管理面板
+auths.auth_sources=Authentication Sources
 auths.new=添加新認證源
 auths.name=認證名稱
 auths.type=認證類型
@@ -1128,7 +1132,6 @@ auths.enable_tls=啟用 TLS 加密
 auths.skip_tls_verify=忽略 TLS 驗證
 auths.pam_service_name=PAM 服務名稱
 auths.enable_auto_register=允許授權用戶自動註冊
-auths.tips=幫助提示
 auths.edit=編輯認證設置
 auths.activated=該授權認證已經啟用
 auths.new_success=新的認證源 "%s" 添加成功！
@@ -1284,7 +1287,6 @@ notices.delete_success=系統提示刪除成功！
 
 [action]
 create_repo=創建了儲存庫 <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=重新命名倉庫 <code>%[1]s</code> 為 <a href="%[2]s">%[3]s</a>
 commit_repo=推送了 <a href="%[1]s/src/%[2]s">%[3]s</a> 分支的代碼到 <a href="%[1]s">%[4]s</a>
 compare_commits=查看 %d 次提交的內容比對
@@ -1301,6 +1303,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=推送了標籤 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=之前

conf/locale/locale_zh-TW.ini

@@ -151,6 +151,8 @@ register_hepler_msg=已經註冊？立即登錄！
 social_register_hepler_msg=已經註冊？立即綁定！
 disable_register_prompt=對不起，註冊功能已被關閉。請聯系網站管理員。
 disable_register_mail=對不起，註冊郵箱確認功能已被關閉。
+auth_source=Authentication Source
+local=Local
 remember_me=記住登錄
 forgot_password=忘記密碼
 forget_password=忘記密碼？
@@ -229,6 +231,7 @@ org_name_been_taken=組織名稱已經被佔用。
 team_name_been_taken=團隊名稱已經被佔用。
 email_been_used=郵箱地址已經被使用。
 username_password_incorrect=用戶名或密碼不正確。
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=請檢查您輸入的倉庫名稱是正確。
 enterred_invalid_owner_name=請檢查您輸入的新所有者用戶名是否正確。
 enterred_invalid_password=請檢查您輸入的密碼是否正確。
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=或輸入密碼: %s
 two_factor_then_enter_passcode=然後輸入驗證碼：
 two_factor_verify=驗證
 two_factor_invalid_passcode=您輸入的密碼無效，請再試一次。
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=啟用兩步驗證失敗: %v
 two_factor_enable_success=您帳戶的兩步驗證已成功啟用！
 two_factor_recovery_codes_title=兩步驗證恢復代碼
@@ -819,10 +823,10 @@ settings.event_push=推送
 settings.event_push_desc=Git 倉庫推送
 settings.event_issues=Issues
 settings.event_issues_desc=已經開啟、關閉、重啟、修改、指派、取消指派、更新標籤、清除標籤、新增里程碑或刪除里程碑的 issue。
-settings.event_issue_comment=Issue 評論
-settings.event_issue_comment_desc=已經建立、編輯或刪除的 Issue 評論。
 settings.event_pull_request=合併請求
 settings.event_pull_request_desc=已經開啟、關閉、重啟、編輯、指派、解除指派、更新標籤、清除標籤、新增里程碑、刪除里程碑或同步的 pull request。
+settings.event_issue_comment=Issue 評論
+settings.event_issue_comment_desc=已經建立、編輯或刪除的 Issue 評論。
 settings.event_release=Release
 settings.event_release_desc=Release 將發佈在一個 repository 中。
 settings.active=是否激活
@@ -1087,7 +1091,7 @@ repos.stars=讚好數
 repos.issues=問題數
 repos.size=大小
 
-auths.auth_manage_panel=認證管理面板
+auths.auth_sources=Authentication Sources
 auths.new=添加新認證源
 auths.name=認證名稱
 auths.type=認證類型
@@ -1128,7 +1132,6 @@ auths.enable_tls=啟用 TLS 加密
 auths.skip_tls_verify=忽略 TLS 驗證
 auths.pam_service_name=PAM 服務名稱
 auths.enable_auto_register=允許授權用戶自動註冊
-auths.tips=幫助提示
 auths.edit=編輯認證設置
 auths.activated=該授權認證已經啟用
 auths.new_success=新的認證源 "%s" 添加成功！
@@ -1284,7 +1287,6 @@ notices.delete_success=系統提示刪除成功！
 
 [action]
 create_repo=創建了儲存庫 <a href="%s">%s</a>
-fork_repo=已經 fork 一個 repository 到 <a href="%s">%s</a>
 rename_repo=重新命名倉庫 <code>%[1]s</code> 為 <a href="%[2]s">%[3]s</a>
 commit_repo=推送了 <a href="%[1]s/src/%[2]s">%[3]s</a> 分支的代碼到 <a href="%[1]s">%[4]s</a>
 compare_commits=查看 %d 次提交的內容比對
@@ -1301,6 +1303,10 @@ create_branch=在 <a href="%[1]s">%[4]s</a> 建立新的分支 <a href="%[1]s/sr
 delete_branch=已經刪除在 <a href="%[1]s">%[3]s</a> 上的分支 <code>%[2]s</code>
 push_tag=推送了標籤 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
 delete_tag=已經刪除在 <a href="%[1]s">%[3]s</a> 上的標籤 <code>%[2]s</code>
+fork_repo=已經 fork 一個 repository 到 <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=之前