mbsync/NEWS

[0.9]

Added Tunnel directive to allow the user to specify a shell command to run
to set up an IMAP connection in place of a TCP socket (eg., to run over
an SSH session).

Added PREAUTH support (useful mostly in conjunction with Tunnel).

Messages marked deleted are not uploaded when we are going to expunge.

Locally generated messages are not re-fetched after uploading even if the
UIDPLUS extension is not supported by the server.

Added `OneToOne' configuration option: ignore any Mailbox specifications
and instead pick up all mailboxes from the local MailDir and remote Folder
and map them 1:1 onto each other according to their names.

-C now creates both local and remote boxes; -L and -R create only local/remote.

--quiet is now really quiet.

[0.8]

!!! IMPORTANT !!!

In order to fix the problem where messages copied from one mailbox to
another were not uploaded to the new mailbox, the way Isync stores the UID
for each message needed to be changed.  As a result, you _MUST_ delete all
the messages in the local maildir box before using this version.  Otherwise
it will upload every message to the server thinking its a new mail.

[0.7]

Added `MaxMessages' configuration option to allow tracking of only the most
recently added message in the local mailbox.

Added --create (-C) command line option to force creation of the local
maildir-style mailbox if it doesn't already exist.

[0.6]

Added `Delete' configuration option to correspond to the -d command line
option.

Added -a (--all) command line option to synchronize all mailboxes.

[0.5]

Updated SSL support.

Added CRAM authentication support.

Added MailDir configuration option to specify the default location of local
mailboxes when relative paths are used.

Added support for uploading local messages to the IMAP server.

Added CopyDeletedTo configuration option to cause isync to move deleted
messages to a particular mailbox on the server when they are expunged.

[0.4]

Added MaxSize configuration option to limit downloading of new messages from
the server to less than some threshold.

More robust --fast option works without using \Recent flags, so the previous
problem with multiple accesses killing these flags is no longer a problem.

RFC2060 obsoleted RFC822.PEEK, use BODY.PEEK[] instead which does the same
job.

Don't need to request UID in a FETCH when doing UID FETCH (RFC2060 states
that its automatically returned).

[0.3]

Fixed to clean up temp maildir files when the fetch of a new message failed.

Fixed to not assume order of the flags returned by "UID FETCH"

Added support for building RPMs.

[0.2]

SSL support added.

[0.1]

Initial release.
- took over maintenance - moved to sourceforge - reorganized cvs structure 22 years ago			`[0.9]`

update 22 years ago			`Added Tunnel directive to allow the user to specify a shell command to run`
			`to set up an IMAP connection in place of a TCP socket (eg., to run over`
			`an SSH session).`

			`Added PREAUTH support (useful mostly in conjunction with Tunnel).`

			`Messages marked deleted are not uploaded when we are going to expunge.`

			`Locally generated messages are not re-fetched after uploading even if the`
			`UIDPLUS extension is not supported by the server.`

			Added `OneToOne' configuration option: ignore any Mailbox specifications
			`and instead pick up all mailboxes from the local MailDir and remote Folder`
			`and map them 1:1 onto each other according to their names.`

			`-C now creates both local and remote boxes; -L and -R create only local/remote.`

			`--quiet is now really quiet.`
- took over maintenance - moved to sourceforge - reorganized cvs structure 22 years ago
updated year in copyright notice the uid for each message in the maildir is now stored in a dbm database rather than the filename. this change was necessary because isync became confused if you copied a message to another folder, in which case the uid was invalid. as a result of the above change, isync now acquires a mutex on the mailbox to protect the dbm database from concurrent access. main() was reworked to continue gracefully when an error is encountered, and to always call maildir_close() so that the lock can be disabled, and the database closed. 23 years ago			`[0.8]`

remove tilde backup files for distclean fixed indentation added full name to AUTHORS reformated NEWS blurb for 0.8 23 years ago			`!!! IMPORTANT !!!`

			`In order to fix the problem where messages copied from one mailbox to`
			`another were not uploaded to the new mailbox, the way Isync stores the UID`
			`for each message needed to be changed. As a result, you _MUST_ delete all`
			`the messages in the local maildir box before using this version. Otherwise`
			`it will upload every message to the server thinking its a new mail.`
updated year in copyright notice the uid for each message in the maildir is now stored in a dbm database rather than the filename. this change was necessary because isync became confused if you copied a message to another folder, in which case the uid was invalid. as a result of the above change, isync now acquires a mutex on the mailbox to protect the dbm database from concurrent access. main() was reworked to continue gracefully when an error is encountered, and to always call maildir_close() so that the lock can be disabled, and the database closed. 23 years ago
Added MaxMessages patch from Eivind Eklund <eivind@FreeBSD.org>. config_defaults() can just use memcpy() instead of assigning each struct member individually. config_defaults() can be declared static 23 years ago			`[0.7]`

			Added `MaxMessages' configuration option to allow tracking of only the most
			`recently added message in the local mailbox.`

added --create/-C command line option to force creation of the local maildir-style mailbox if nonexistent debug.h was not included in isync_SOURCES in Makefile.am 23 years ago			`Added --create (-C) command line option to force creation of the local`
			`maildir-style mailbox if it doesn't already exist.`

added `Delete' configuration option to force -d option sync_mailbox() didn't consider MaxSize == 0 to mean "unlimited". load_config() needs to print a newline in its error messages since next_arg() kills the newline of the line that was read out of the config file. 24 years ago			`[0.6]`

			Added `Delete' configuration option to correspond to the -d command line
			`option.`

post 0.6 commit 24 years ago			`Added -a (--all) command line option to synchronize all mailboxes.`

post 0.5-release commit 24 years ago			`[0.5]`

			`Updated SSL support.`

			`Added CRAM authentication support.`

			`Added MailDir configuration option to specify the default location of local`
			`mailboxes when relative paths are used.`

			`Added support for uploading local messages to the IMAP server.`

			`Added CopyDeletedTo configuration option to cause isync to move deleted`
			`messages to a particular mailbox on the server when they are expunged.`

added MaxSize configuration variable fixed --fast to work robustly without relying on the \Recent flag in messages 24 years ago			`[0.4]`

			`Added MaxSize configuration option to limit downloading of new messages from`
			`the server to less than some threshold.`

			`More robust --fast option works without using \Recent flags, so the previous`
			`problem with multiple accesses killing these flags is no longer a problem.`

			`RFC2060 obsoleted RFC822.PEEK, use BODY.PEEK[] instead which does the same`
			`job.`

			`Don't need to request UID in a FETCH when doing UID FETCH (RFC2060 states`
			`that its automatically returned).`

updated NEWS for 0.3 release 24 years ago			`[0.3]`

			`Fixed to clean up temp maildir files when the fetch of a new message failed.`

			`Fixed to not assume order of the flags returned by "UID FETCH"`

			`Added support for building RPMs.`

			`[0.2]`

			`SSL support added.`

initial import 24 years ago			`[0.1]`

			`Initial release.`